Si el contenido no está traducido, puede usar la herramienta de traducción automática

Adifap - Avances en la Deformación Incremental para su aplicación en la Fabricación de Prótesis poliméricas biocompatibles. (DPI2012-36042)

Artículos

Contacte

Dra. Maria Luisa Garcia-Romeu de Luna

Investigadora principal

POLITÈCNICA II - Despacho 102

Campus Montilivi

17071 - GIRONA

mluisa.gromeu@udg.edu

 

 

Publicaciones

Artículos en revista
  • Bagudanch, I., Vives-Mestres, M., Sabater, M., Garcia-Romeu, M.L. (2016) "Polymer incremental sheet forming process: temperature analysis using response surface methodology" Materials and Manufacturing Processes, accepted for publication
  • Bagudanch, I., Garcia-Romeu, M.L., Sabater, M. (2016) "Incremental forming of polymers: Process parameters selection from the perspective of electric energy consumption and cost"  Journal of Cleaner Production, Vol. 112, 1013-1024
  • Bagudanch, I., Garcia-Romeu, M.L., Centeno, G., Elías-Zúñiga, A., Ciurana, J. (2015) “Forming force and temperature effects on single point incremental forming of polyvinylchloride”, Journal of Materials Processing Technology. Vol. 219, 221-229
  • Centeno, G., Bagudanch, I., Martínez-Donaire, A.J., García-Romeu, M.L., Vallellano, C. “Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming” (2014) Materials and Design, Vol. 63, 20-29
  • Elías-Zúñiga, A., Baylón, K., Ferrer, I., Serenó,L., Garcia-Romeu, M.L., Bagudanch, I., Grabalosa, J. , Pérez-Recio, T., Martinez-Romero, O., Ortega-Lara, W., Elizalde, L.E. (2014) “On the rule of mixtures for predicting stress-softening and residual strain effects in biological tissues and biocompatible materials” Materials. Vol. 7, 1, 441-456

 

Ponencias en Congresos

 

Advances in Materials & Processing Technologies Conference (AMPT 2015)

  • Bagudanch, I., Sabater, M., Garcia-Romeu, M.L. "Single Point versus Two Point Incremental Forming of thermoplastic materials"

  • Lozano-Sánchez, L.M., Bagudanch, I., Elizalde, L.E., Garcia-Romeu, M.L., Elías-Zúñiga, A.E. "Preparation of biocompatible polymers sheets useful in the incremental sheet forming process"

VI Manufacturing Engineering Society Internacional Conference (MESIC 2015)

  • Bagudanch,I. , Lozano,M., Puigpinós,L., Sabater,M., Elías-Zúñiga,A., Garcia-Romeu,M.L. "Manufacturing of polymeric biocompatible cranial geometry by single point incremental forming" Procedia engineering, Vol. 132, pp. 267-273

  • Centeno,G., Morales-Palma,D., Bagudanch,I., Martínez-Donaire,A.J., García-Romeu,M.L., Vallellano, C.  "Experimental strain analysis on the manufacturing of polymer cranial prosthesis by single-point incremental forming"

2nd International conference on design and processes for medical devices, PROMED 2014; Monterrey, México, 17-19 March 2014

  • Bagudanch, I., Garcia-Romeu, M.L., Ferrer, I. (2014). "Manufacturing of thermoplastic cranial prosthesis by incremental sheet forming".
  • Garcia-Romeu, M.L., Bagudanch, I., Lozano-Sánchez, L.M., Martínez-Romero, O., Elías-Zúñiga, A., Elizalde, L.E. (2014). "On the manufacture of biomedical devices based on nano-polymer composites by single point incremental forming".

International Conf. on Technology of Plasticity, ICTP 2014; Nagoya; Japan; 19-24 October 2014

  • Martínez-Romero, O., García-Romeu, M.L., Olvera-Trejo, D., Bagudanch, I., Elías-Zúñiga, A. (2014)  “Tool dynamics during single point incremental forming process”, Procedia Engineering. Vol. 81, Issue C, 2286- 2291
  • Bagudanch, I., Martínez-Romero, O., Elías-Zúñiga, A., Garcia-Romeu, M.L. (2014) “Identifying polymeric constitutive equations for incremental sheet forming modeling”, Procedia Engineering. Vol. 81, Issue C, 2292-2297

Esaform 2013

  • Bagudanch I.; Elias-Zúñiga, A. ;Garcia-Romeu M.L. (2013) “Evaluating material constitutive equations for the simulation of Incremental Sheet Forming applied to form thermoplastic materials.” Key Engineering Materials 554-557: 1312-1319.