If the contents are not translated, you can use the automatic translator

Department of Mechanical Engineering and Industrial Construction

Journals

Contact

Department of Mechanical Engineering and Industrial Construction
Escola Politècnica Superior (edifici P-II)
Campus de Montilivi mapa de situacio
17071 GIRONA
Tel. 972 41 83 84
Fax 972 41 80 98
secretaria@demci.udg.edu

AMADE, Anàlisi i Materials avançats per al Disseny Estructural

Journal publications

    Abstract
    Ripoll, L.; Pérez Aparicio, J.L.  "Optimización de Tensiones en Volantes Unicapa Mediante Pretensado Térmico."  Materiales compuestos   (2004):  -.
    Ripoll, L.; Pérez Aparicio, J.L.  "Tensiones residuales en cilindros de materiales compuestos curados a temperatura no uniforme ."  Materiales compuestos   (2004):  -.

     

    Article
    Adrián Ortega; Pere Maimí, Emilio V. González: Daniel Trias.  "Specimen geometry and specimen size dependence of the R-curve and the size effect law from a cohesive model point of view."  International Journal of Fracture  205 (2017):  239-254.
    Adrián Ortega; Pere Maimí; Emilio V. González; José Ramon Sainz de Aja; Federico M. de la Escalera; Pablo Cruz  "Translaminar fracture toughness of interply hybrid laminates under tensile and compressive loads."  Composites Science and Technology  143 (2017):  1-12.
    Barris, C.; Torres, L.; Vilanova, C.; Miàs, C.; Llorens, M.  "Experimental study on crack width and crack spacing for Glass-FRP reinforced concrete beams."  Engineering Structures  131 (2017):  231-242.
    Carreras, L.; Renart, J.; Turon, A.; Costa, J.; Essa, Y.; Martin de la Escalera, F.  "An efficient methodology for the experimental characterization of mode II delamination growth under fatigue loading."  International Journal of Fatigue  95 (2017):  185-193.
    O Falcó; CS Lopes; F Naya; F Sket; Pere Maimí; JA Mayugo  "Modelling and simulation of tow-drop effects arising from the manufacturing of steered-fibre composites."  Composites. Part A, Applied science and manufacturing  93 (2017):  53-71.
    Renner, J.; Ripoll, L.; et al.  "Background rejection in NEXT using deep neural networks."  Journal of Instrumentation  12 (2017):  T01004-.
    Taïra, Fadila; Carreras, Laura; Camps, Jaume; Farjas, Jordi; Roura, Pere; Calleja, Albert; Puig, Teresa; Obradors, Xavier  "Melting temperature of YBa2Cu3O7−x and GdBa2Cu3O7−x at subatmospheric partial pressure."  Journal of Alloys and Compounds  692 (2017):  787-792.
    A. Wagih  "Effect of Mg addition on mechanical and thermoelectrical properties of Al−Al2O3 nanocomposite."  Transactions of Nonferrous Metals Society of China   (2016):  -.
    A. Wagih  "Synthesis of Nanocrystalline Al2O3 Reinforced Al Nanocomposites by High-Energy Mechanical Alloying: Microstructural Evolution and Mechanical Properties."  Transactions of the Indian Institute of Metals   (2016):  -.
    A. Wagih, A. Fathy  "Experimental investigation and FE simulation of nano-indentation on Al-Al2O3 nanocomposites."  Advanced Powder Technology   (2016):  -.
    A. Wagih, A. Fathy, T.A. Sebaey  "Experimental investigation on the compressibility of Al/Al2O3 nanocomposites."  International Journal of Materials & Product Technology   (2016):  -.
    Adrián Ortega; Pere Maimí; Emilio Vicente Gonz ález; Daniel Trias;  "Characterization of the translaminar fracture cohesive law."  Composites. Part A, Applied science and manufacturing  91 (2016):  501-509.
    Baena, M.; Torres, L.; Turon, A.; Llorens, M.; Barris, C  "Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars."  Construction and Building Materials  106 (2016):  449-460.
    Barris, C.; Torres,L.; Simon, E.  "Learning based on the project entitled 'Design and construction of a wooden bridge'."  Journal of Technology and Science Education  62 (2016):  135-143.
    Cabello Ulloa, Mario; Zurbitu Gonzalez, Javier; Renart Canalia, Jordi; Turon Blasco, Albert; Martínez, Félix  "A General analytical model based on elastic foundation beam theory for adhesively bonded DCB joints either with flexible or rigid adhesives."  International Journal of Solids and Structures  94-95 (2016):  21-34.
    El-Nemr A.; Ahmed EA; Barris C; Benmokrane B  "Bond-dependent coefficient of glass- and carbon-FRP bars in normal and high-strength concretes."  Construction and Building Materials   (2016):  77-89.
    Ferrario, P.; Laing, A.; López-March, N.; Gómez-Cadenas, J. J.; Álvarez, V.; Azevedo, C. D R; Borges, F. I G; Cárcel, S.; Cebrián, S.; Cervera, A.; Conde, C. A N; Dafni, T.; Díaz, J.; Diesburg, M.; Esteve, R.; Fernandes, L. M  "First proof of topological signature in the high pressure xenon gas TPC with electroluminescence amplification for the NEXT experiment."  Journal of High Energy Physics  January 2016 (2016):  -.
    Guillamet, G.; Turon, A.; Costa, J.; Linde, P.  "A quick procedure to predict free-edge delamination in thin-ply laminates under tension."  Engineering Fracture Mechanics   (2016):  -.
    Marín, L.; González, E.V.; Maimí, P.; Trias, D.; Camanho, P.P.  "Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms."  Composites Science and Technology  122 (2016):  130-139.
    Martín Albo, J.; Muñoz Vidal, J.; Ferrario, P.; Nebot Guinot, M.; Gómez Cadenas, J.J.; Álvarez, V.; Azevedo, C. D.R.; Borges, F. I.G.; Cárcel, S.; Carrión, J. v.; Cebrián, S.; Cervera, A.; Conde, C. A.N.; Díaz, J.; Diesburg,   "Sensitivity of NEXT-100 to neutrinoless double beta decay."  Journal of High Energy Physics  May 2016 (2016):  -.
    Pérez-Galmés, M.; Renart, J.; Sarrado, C.; Rodríguez-Bellido, A.; Costa, J.  "A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test."  Composites. Part A, Applied science and manufacturing  90 (2016):  670-677.
    Renart, J.; Vicens, J.; Budhe, S.; Rodríguez-Bellido, A.; Comas, J.; Mayugo, J.A.; Costa, J.  "An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen's compliance."  International Journal of Fatigue  82 (2016):  634-642.
    Sarrado, C.; Leone, F.A.; Turon, A.  "Finite-thickness cohesive elements for modeling thick adhesives."  Engineering Fracture Mechanics   (2016):  -.
    Sarrado, C.; Turon, A.; Costa, J.; Renart, J.  "An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws."  Composites. Part A, Applied science and manufacturing  90 (2016):  234-242.
    Sarrado, C.; Turon, A.; Costa, J.; Renart, J.  "On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints."  International Journal of Solids and Structures  81 (2016):  110-116.
    Soto, A.; González, E.V.; Maimí, P.; Turon, A.; Sainz de Aja, J.R.; de la Escalera, F.M.  "Cohesive zone length of orthotropic materials undergoing delamination."  Engineering Fracture Mechanics  159 (2016):  174-188.
    Torres, L.; Sharaky, I.A.; Barris, C.; Baena, M.  "Experimental study of the influence of adhesive properties and bond length on the bond behaviour of NSM FRP bars in concrete."  Journal of Civil Engineering and Management  22 (2016):  808-817.
    Trias Mansilla, Daniel; Maimí Vert, Pere; Blanco Villaverde, Norbert  "Maximization of the fundamental frequency of plates and cylinders."  Composite Structures  156 (2016):  375-384.
    Vilanova, I.; Torres, L.; Baena, M.; Llorens, M.  "Numerical simulation of bond-slip interface and tension stiffening in GFRP RC tensile elements."  Composite Structures  153 (2016):  504-513.
    Wagih, A.; Maimí Vert, Pere; Blanco Villaverde, Norbert; Trias Mansilla, Daniel  "Predictive model for the spherical indentation of composite laminates with finite thickness."  Composite Structures  153 (2016):  468-477.
    Wagih, A.; Maimí, P.; Blanco, N.; Costa, J.  "A quasi-static indentation test to elucidate the sequence of damage events in low velocity impacts on composite laminates."  Composites. Part A, Applied science and manufacturing  82 (2016):  180-189.
    Wagih, A.; Maimí, P.; González, E.V.; Blanco, N.; Sainz de Aja, J.R.; de la Escalera, F.M.; Olsson, R.; Alvarez, E.  "Damage sequence in thin-ply composite laminates under out-of-plane loading."  Composites. Part A, Applied science and manufacturing  87 (2016):  66-77.
    A. Wagih  "Mechanical properties of Al-Mg/Al2O3 nanocomposite powder produced by mechanical alloying."  Advanced Powder Technology   (2015):  -.
    Badalló, P.; Trias, D.; Lidngaard, E.  "Damage tolerance optimization of composite stringer run-out under tensile load."  Composite Structures  133 (2015):  98-104.
    Brian L.V. Bak; Albert Turon; Esben Lindgaard; Erik Lund  "A simulation method for high-cycle fatigue-driven delamination using a cohesive zone model."  International Journal for Numerical Methods in Engineering   (2015):  -.
    C. Miàs, L. Torres, M. Guadagnini, A. Turon  "Short and long-term cracking behaviour of GFRP reinforced concrete beams."  Composites. Part B, Engineering  77 (2015):  223-231.
    Cabello, M.; Zurbitu, J.; Renart, J.; Turon, A.; Martínez, F.  "A Non-linear hyperelastic foundation beam theory model for double cantilever beam tests with thick flexible adhesive."  International Journal of Solids and Structures  80 (2015):  19-27.
    Cao Nguyen, T.; Pansuk, W.; Torres, L.  "Flexural behavior of fire-damaged reinforced concrete slabs repaired with near-surface mounted (NSM) carbon fiber reinforced polymer (CFRP) rods."  Journal Of Advanced Concrete Technology  13 (2015):  15-29.
    Cebrián, S.; Ripoll, L. [et al.]  "Radiopurity assessment of the tracking readout for the NEXT double beta decay experiment."  Journal of Instrumentation  May 2015 (2015):  -.
    D. Piedrafita; X. Cahis; E. Simon; J. Comas  "A new Perforated core buckling restrained brace."  Engineering Structures  85 (2015):  118-126.
    Ferreira, D.; Oller, E.; Barris, C.; Torres, L.   "Shear strain influence in the service response of FRP reinforced concrete beams."  Composite Structures  121 (2015):  142-153.
    Freitas, E.D.C.; Fernandes, L.M.P.; Yahlali, N.; Pérez, J.; Álvarez, V.; Borges, F.I.G.; Camargo, M; Cárcel, S.; Cebrián, S.; Cervera, A.; Conde, C.A.N.; Dafni,T.; Díaz,J.; Esteve,R.; Ferrario, P.; Ferreira,A.L.; Gehman,V.M.;  "PMT calibration of a scintillation detector using primary scintillation."  Journal of Instrumentation  10 (2015):  -.
    González-Díaz, D., ... Ripoll L.   "Accurate γ and MeV-electron track reconstruction with an ultra-low diffusion Xenon/TMA TPC at 10 atm."  Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment  804 (2015):  8-24.
    Isart Valle, Nativitat; El Said, B.; Ivanov, D.S.; Hallett, S.R.; Mayugo Majó, Joan Andreu; Blanco Villaverde, Norbert  "Internal geometric modelling of 3D woven composites: A comparison between different approaches."  Composite Structures  132 (2015):  1219-1230.
    Kabeel, AM; Maimí, P; González, EV; Gascons, N  "Net-tension strength of double-lap joints under bearing-bypass loading conditions using the cohesive zone model ."  Composite Structures  119 (2015):  443-451.
    L. Zubillaga; A. Turon; J. Renart; J. Costa; P. Linde  "An experimental study on matrix crack induced delamination in composite laminates."  Composite Structures  127 (2015):  10-17.
    Miquel F. Llop, Narcis Gascons, Francesc X. Llauró  "Recurrence plots to characterize gas–solid fluidization regimes."  International Journal of Multiphase Flow  73 (2015):  43-56.
    N. Isart;J.A. Mayugo;N. Blanco;L. Ripoll;A. Sola;M. Soler  "Geometric model for 3D through-thickness orthogonal interlock composites."  Composite Structures  119 (2015):  787-798.
    Piedrafita, D.; Maimí, P.; Cahís, X.  "A constitutive model for a novel modular all-steel buckling restrained brace ."  Engineering Structures  100 (2015):  118-126.
    Renner, J.; Ripoll L.[et al.]  "Ionization and scintillation of nuclear recoils in gaseous xenon."  Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment  September 2015 (2015):  62-74.
    Roura, P. ;Farjas, J.; Eloussifi, H; Carreras, L.; Ricart, S.; Puig, T.; Obradors, X.  "Thermal analysis of metal organic precursors for functional oxide preparation: Thin films versus powders."  Thermochimica Acta  601 (2015):  1-8.
    Sarrado Molina, Carlos; Turon Travesa, Albert; Renart Canalias, Jordi; Costa i Balanzat, Josep  "An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach."  Composites Science and Technology  117 (2015):  85-91.
    Serra L; ...Ripoll L  "An improved measurement of electron-ion recombination in high-pressure xenon gas."  Journal of Instrumentation  10 (2015):  -.
    Sharaky, I.A.; Torres, L.; Salam, H.E.M.  "Experimental and analytical investigation into the flexural performance of RC beams with partially and fully bonded NSM FRP bars/strips."  Composite Structures  122 (2015):  113-126.
    Torres, Ll; Barris, C; Kaklauskas, G; Gribniak, V.  "Modelling of tension-stiffening in bending RC elements based on equivalent stiffness of the rebar."  Structural Engineering and Mechanics  53 (2015):  997-1016.
    Vilanova, I; Baena, M.; Torres, L.; Barris, C.  "Experimental study of bond-slip of GFRP bars in concrete under sustained loads."  Composites. Part B, Engineering  74 (2015):  42-52.
    Brian L. V. Bak, Carlos Sarrado, Albert Turon and Josep Costa   "Delamination Under Fatigue Loads in Composite Laminates: A Review on the Observed Phenomenology and Computational Methods."  Applied Mechanics Reviews  66 (2014):  060803-.
    A. Fathy, A. Wagih, M. Abd El-Hamid, A. A. Hassan  "Effect of Mechanical Milling on the Morphologyand Structural Evaluation ofAl- Al2O3 Nanocomposite Powders."  Composite Structures   (2014):  -.
    A. Fathy, A. Wagih, M. Abd El-Hamid, Ahmed A. Hassan  "The effect of Mg add on morphology and mechanical properties of Al-xMg/10Al2O3 nanocomposite produced by mechanical alloying."  Advanced Powder Technology   (2014):  -.
    A. Ortega; P. Maimí; E.V. González; Ll. Ripoll.  "Compact tension specimen for orthotropic materials."  Composites. Part A, Applied science and manufacturing  63 (2014):  85-.
    Álvarez, V.; Ripoll, L.[et al.]  "Description and commissioning of NEXT-MM prototype: first results from operation in a Xenon-Trimethylamine gas mixture."  Journal of Instrumentation  March 2014 (2014):  -.
    D Lorca; L. Ripoll [et al.]  "Characterisation of NEXT-DEMO using xenon Kα X-rays."  Journal of Instrumentation  october 2014 (2014):  -.
    Falco, O.; Lopes, C.S.; Mayugo, J.A. ; Gascons, N.; Renart, J.  "Effect of tow-drop gaps on the damage resistance and tolerance of Variable-Stiffness Panels."  Composite Structures  116 (2014):  94-103.
    Falco, O.; Mayugo, J.A.; Lopes, C.S.; Gascons, N.; Costa, J.  "Variable-stiffness composite panels: Defect tolerance under in-plane tensile loading."  Composites. Part A, Applied science and manufacturing  63 (2014):  21-31.
    Falco, O.; Mayugo, J.A.; Lopes, C.S.; Gascons, N.; Turon, A.; Costa, J.  "Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior ."  Composites. Part B, Engineering  56 (2014):  660-669.
    G. Guillamet; A. Turon; J. Costa; J. Renart; P. Linde; J.A. Mayugo  "Damage occurrence at edges of Non-crimp-fabric thin-ply laminates under off-axis uniaxial loading."  Composites Science and Technology  98 (2014):  44-50.
    Garcia, R.; Hajirasouliha, I.; Guadagnini, M.; Helal, Y.; Jemaa, Y.; Pilakoutas, K.; Mongabure, P.; Chrysostomou, C.; Kyriakides, N.; Ilkid, A.; Budescu, M.; Taranu, N.; Ciupala, M.A.; Torres, L.; Saiidi, M.  "Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal Straps. ."  Journal of Earthquake Engineering  18 (2014):  187-213.
    Gómez Cadenas, J.J.; Ripoll, L. [et al.]  "Present status and future perspectives of the NEXT experiment ."  Advances In High Energy Physics  2014 (2014):  -.
    González, EV; Maimí, P; Sainz de Aja, JR; Cruz,P; Camanho PP  "Effects of interply hybridization on the damage resistance and tolerance of composite laminates."  Composite Structures  108 (2014):  319-331.
    Guillamet, G., Liv, Y., Turon, A., Marín, L., González, E.V., Mayugo, J.A., Costa, J.   "Design of non-conventional CFRP laminates for improved damage resistance and damage tolerance."  16th European Conference on Composite Materials, ECCM 2014   (2014):  -.
    Kabeel, AM; Maimí, P; Gascons, N; González, EV  "Net-tension strength of double lap joints taking into account the material cohesive law."  Composite Structures  112 (2014):  207-213.
    L. Zubillaga; A. Turon; P. Maimí; J. Costa; S. Mahdi; P. Linde  "An enenrgy based failure criterion for matrix crack induced delamination in laminated composite structures.."  Composite Structures  112 (2014):  339-344.
    Maimí, P; González, E.V.; Camanho, P.P.  "Comment to the paper ‘Analysis of Progressive Matrix Cracking in Composite Laminates II. First Ply Failure’ by George J Dvorak and Norman Laws."  Journal of Composite Materials  48 (2014):  1139-1141.
    Martín-Santos, E; Maimí, P; González, EV; Cruz,P  "A continuum constitutive model for the simulation of fabric-reinforced composites."  Composite Structures  111 (2014):  122-129.
    N. Blanco; D. Trias; S.T. Pinho; P. Robinson  "Intralaminar fracture toughness characterisation of woven composite laminates. Part I: Design and analysis of a compact tension (CT) specimen."  Engineering Fracture Mechanics  131 (2014):  349-370.
    N. Blanco; D. Trias; S.T. Pinho; P. Robinson  "Intralaminar fracture toughness characterisation of woven composite laminates. Part II: Experimental characterisation."  Engineering Fracture Mechanics  131 (2014):  361-370.
    S. Budhe, A. Rodríguez-Bellido, J. Renart, J.A. Mayugo, J. Costa  "Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs ."  International Journal of Adhesion and Adhesives  49 (2014):  80-89.
    T.A. Sebaey; J. Costa; P. Maimí; Y. Batista; N. Blanco; J.A. Mayugo  "Measurement of the in situ transverse tensile strength of composite plies by means of the real time monitoring of microcracking."  Composites. Part B, Engineering  65 (2014):  40-46.
    V. Álvarez;... L. Ripoll  "Characterization of a medium size Xe/TMA TPC instrumented with microbulk Micromegas, using low-energy γ-rays."  Journal of Instrumentation  9 (2014):  -.
    Vilanova, I.; Torres, L.; Baena, M.; Kaklauskas, G.; Gribniak, V.  "Experimental study of tension stiffening in GFRP RC tensile members under sustained load."  Engineering Structures  79 (2014):  390-400.
    T.A. Sebaey; E.V. González; C.S. Lopes; N. Blanco; J. Costa  "Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimization ."  Composite Structures  95 (2013):  569-576.
    T.A. Sebaey; E.V. González; C.S. Lopes; N. Blanco; J. Costa  "Damage resistance and damage tolerance of dispersed CFRP laminates: The bending stiffness effect."  Composite Structures  106 (2013):  30-32.
    T.A. Sebaey; E.V. González; C.S. Lopes; N. Blanco; J. Costa  "Damage resistance and tolerance of dispersed CFRP laminates: Effect of ply clustering."  Composite Structures  106 (2013):  96-103.
    T.A. Sebaey; E.V. González; C.S. Lopes; N. Blanco; P.Maimí; J. Costa  "Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies ."  Composite Structures  101 (2013):  255-264.
    Álvarez, V.; Ripoll, L.[et al.]  "Design and characterization of the SiPM tracking system of the NEXT-DEMO, a demonstrator prototype of the NEXT-100 experiment."  Journal of Instrumentation  8(5) (2013):  -.
    Álvarez, V.; Ripoll, L.[et al.]  "Initial results of NEXT-DEMO, a large-scale prototype of the NEXT-100 experiment."  Journal of Instrumentation  8(4) (2013):  -.
    Álvarez, V.; Ripoll, L.[et al.]  "Ionization and scintillation response of high-pressure xenon gas to alpha particles."  Journal of Instrumentation  8 (2013):  -.
    Álvarez, V.; Ripoll, L.[et al.]  "Operation and first results of the NEXT-DEMO prototype using a silicon photomultiplier tracking array."  Journal of Instrumentation  8 (9) (2013):  -.
    Álvarez, V.; Ripoll, L.[et al.]  "Radiopurity control in the NEXT-100 double beta decay experiment: Procedures and initial measurements."  Journal of Instrumentation  8 (1) (2013):  -.
    Baena, M.; Torres, Ll.; Turon, A.; Miàs, C.  "Analysis of cracking behaviour of tension stiffening in FRP reinforced concrete tensile elements ."  Composites. Part B, Engineering  45 (2013):  1360-1367.
    Barris, C.; Torres, L.; Comas, J.; Miàs, C.  "Cracking and deflections in GFRP RC beams: An experimental study ."  Composites. Part B, Engineering  55 (2013):  580-590.
    Cahís X; Benavent-Climent A; Catalán A  "Modelo numérico del comportamiento histerético de uniones entre forjados reticulares y pilares de fachada.."  Revista Internacional de Metodos Numericos Para Calculo y Diseno en Ingenieria  29 (2013):  248-259.
    Daniel Piedrafita; Xavier Cahis; Enric Simon; Jordi Comas  "A new modular buckling restrained brace for seismic resistant buildings."  Engineering Structures  56 (2013):  1967-1975.
    G.L.Balázs;P.Bisch;A.Borosnyói;O.Burdet;C.Burns;F.Ceroni;V.Cervenka;M.A.Chiorino;P.Debernardi;L.Eckfeldt;M.El-Badry;E.Fehling;S.J.Foster;A.Ghali;V.Gribniak;M.Guiglia;G.Kaklauskas;R.J.Lark;P.Lenkei;M.Lorrain;A.Marí;J.Ozbolt;M.  "Design for SLS according to fib Model Code 2010. ."  Structural Concrete  14 (2013):  99-123.
    Gribniak, V.;Kaklauskas, G.; Torres, L.; Daniunas, A.; Timinskas, E.; Gudonis, E.  "Comparative analysis of deformations and tension-stiffening in concrete beams reinforced with GFRP or steel bars and fibers. ."  Composites. Part B, Engineering  50 (2013):  158-170.
    Gribniak,V.; Bacinskas, D.; Kacianauskas, R.; Kaklauskas, G.; Torres, L.  "Long-term deflections of reinforced concrete elements: accuracy analysis of predictions by different methods."  Mechanics of Time-Dependent Materials  17 (2013):  297-313.
    Gribniak,V.; Torres, L.; Kaklauskas, G.;Daniunas, A.; Kacianauskas, R.; Jakubovskis, R.  "Prediction of concrete shrinkage occurring prior to external loading and effect on short-term constitutive modeling and design."  Advances in Structural Engineering  16 (2013):  1061-1080.
    Kabeel, A.M.;Maimí, P.;Gascons, N.;Gonzalez, E.V.  "Nominal strength of quasi-brittle open hole specimens under biaxial loading conditions ."  Composites Science and Technology  87 (2013):  42-49.
    Maimí, P. ; Gonzalez, E.V. ; Gascons, N. ; Ripoll, L.  "Size effect law and critical distance theories to predict the nominal strength of quasibrittle structures."  Applied Mechanics Reviews  65 (2013):  020802-1-.
    Miàs Oller, C; Torres, L.; Turon, A.; Barris Peña, C.  "Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams ."  Composite Structures  96 (2013):  279-285.
    Miàs, C.; Torres, Ll.; Turon, A.; Sharaky,I.A.  "Effect of Material Properties on Long-term Deflections of GFRP Reinforced Concrete Beams ."  Construction and Building Materials  41 (2013):  99-108.
    P. Badalló; D. Trias; L. Marín; J.A. Mayugo   "A comparative study of genetic algorithms for the multi-objective optimization of composite stringers under compression loads."  Composites. Part B, Engineering  47 (2013):  130-136.
    Sans, D.; Renart, J.; Costa, J.; Gascons, N.; Mayugo, J.A.  "Assessment of the influence of the crack monitoring method in interlaminar fatigue tests using fiber Bragg grating sensors ."  Composites Science and Technology  84 (2013):  44-50.
    Sebaey, T.A.; Lopes, C.S.; Blanco, N.; Mayugo, J.A. ; Costa, J.  "Two-pheromone ant colony optimization to design dispersed laminates for aeronautical structural applications."  Advances in Engineering Software  66 (2013):  10-18.
    Sharaky, I.A.; Torres, L.; Baena, M.; Miàs Oller, C.  "An experimental study of different factors affecting the bond of NSM FRP bars in concrete ."  Composite Structures  99 (2013):  350-365.
    Sharaky, I.A.; Torres, L.; Comas, J.; Barris, C.  "Flexural response of reinforced concrete (RC) beams strengthened with near surface mounted (NSM) fibre reinforced polymer (FRP) bars."  Composite Structures  109 (2013):  8-22.
    Sharaky, I.A.; Torres, Ll.; Baena, M.; Vilanova, I.  "Effect of different material and construction details on the bond behaviour of NSM FRP bars in concrete ."  Construction and Building Materials  38 (2013):  890-902.
    V. Alvarez; [et al.]; Ripoll, Ll.  "Near-Intrinsic Energy Resolution for 30 to 662 keV Gamma Rays in a High Pressure Xenon Electroluminescent TPC ."  Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment  708 (2013):  101-114.
    T.A. Sebaey; N. Blanco; J. Costa; C.S. Lopes  "Characterization of crack propagation in mode I delamination of multidirectional CFRP laminates ."  Composites Science and Technology  72 (2012):  1251-1256.
    Barris, C.; Torres, Ll.; Baena, M; Pilakoutas, K.; Guadagnini, M.  "Serviceability limit state of FRP RC beams ."  Advances in Structural Engineering  15 (2012):  653-663.
    Barris, C; Torres, Ll.; Miàs, C.; Vilanova, I.  "Design of FRP reinforced concrete beams for serviceability requirements."  Journal of Civil Engineering and Management  18 (2012):  843-857.
    Camanho, P.P; Arteiro, A.; Turon, A.; Costa, J.; Guillamet, G.; González, E.V.  "Structural integrity of thin-ply laminates."  JEC Composites Magazine  49 (2012):  91-92.
    D. Sans; S. Stutz; J. Renart; J.A. Mayugo; J. Botsis  "Crack tip identification with long FBG sensors in mixed-mode delamination."  Composite Structures  94 (2012):  2879-2887.
    El Mansouri, N.E.; Espinach, F.X.; Julián, F.; Verdaguer, N.; Torres, Ll., Llop, M.F.; Mutjé, P.  "Research on the suitability of organosolv semi-chemical triticale fibers as reinforcement for recycled HDPE composites. ."  Bioresources  7 (2012):  5032-5047.
    Gascons M., Blanco N., Simacek P., Peiro J., Advani S., Matthys K.  "Impact of fibre bed on resin viscosity in liquid composite moulding simulations ."  Applied Composite Materials  19 (2012):  669-688.
    Gascons, M.; Blanco, N.; Matthys, K.  "Evolution of manufacturing processes for fiber-reinforced thermoset tanks, vessels, and silos: a review."  IIE Transactions  44 (2012):  476-489.
    Gascons,M.; Blanco,N.; Mayugo,J.A.; Matthys,K.  "A strategy to support design processes for fibre reinforced thermoset composite materials ."  Applied Composite Materials  19 (2012):  297-314.
    González, Emilio V.; Maimí, P.; Camanho, P.P.; Turon, A.; Mayugo, J.A.  "Simulation of drop-weight impact and compression after impact tests on composite laminates."  Composite Structures  94 (2012):  3364-3378.
    Gutiérrez J.M.; Barbero, E.J.; Cairns, D.R.; Mucino, V.H.; Mayugo, J.A  "Dynamic roughness and power dissipation of polymer films actuated with liquid crystal polymer inclusions."  Smart Materials and Structures  21 (2012):  Art. n.015003 -.
    Lluís Torres; Kyriacos Neocleous; Kypros Pilakoutas  "Design procedure and simplified equations for the flexural capacity of concrete members reinforced with fibre-reinforced polymer bars ."  Structural Concrete  13 (2012):  119-129.
    Marín Hernández, Lorena; Trias Mansilla, Daniel; Badalló i Cañellas, Pere; Mayugo Majó, Joan Andreu  "Optimization of composite stiffened panels under mechanical and hygrothermal loads using neural networks and genetic algorithms ."  Composite Structures  94 (2012):  3321-3326.
    P. Maimí; D. Trias; E.V. González; J. Renart  "Nominal strength of quasi-brittle open hole specimens ."  Composites Science and Technology  72 (2012):  1203-1208.
    Sarrado, C.; Turon, A.; Renart, J.; Urresti, I.  "Assessment of energy dissipation during mixed-mode delamination growth using cohesive zone models."  Composites. Part A, Applied science and manufacturing   (2012):  2128-2136.
    Torres, Ll.; Miàs, C.; Turon, A.; Baena, M.  "A rational method to predict long-term deflections of FRP reinforced concrete members ."  Engineering Structures  40 (2012):  230-239.
    V Álvarez; et al. ; Ripoll, Ll.  "NEXT-100 Technical Design Report (TDR). Executive summary ."  Journal of Instrumentation  7 (2012):  -.
    V Álvarez; et al.; Ripoll, Ll.  "SiPMs coated with TPB: coating protocol and characterization for NEXT ."  Journal of Instrumentation  7 (2012):  -.
    Vallejos, M.E.; Espinach, F.X.; Julián, F.; Torres, Ll.; Vilaseca, F.; Mutjé, P.  "Micromechanics of hemp strands in polypropylene composites ."  Composites Science and Technology  72 (2012):  1209-1213.
    Baena Muñoz, M.; Turon, A.; Torres, Ll.; Miàs Oller, C.  "Erratum to ' Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members' [Compos Struct 93 (2011) 2511-2520]."  Composite Structures  94 (2011):  312-312.
    Baena Muñoz, M.; Turon, A.; Torres, Ll.; Miàs Oller, C.  "Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members ."  Composite Structures  93 (2011):  2511-2520.
    Gascons, M.; Blanco, N.; Vives, J.; Matthys, K.  "Numerical implementation and experimental validation of a through-the thickness temperature model for non-isothermal vacuum bagging infusion."  Journal of Reinforced Plastics and Composites  30 (2011):  1557-1570.
    González, Emilio V.; Maimí, P.; Camanho, P.P.; Lopes, C.S.; Blanco, N.  "Effects of ply clustering in laminated composite plates under low-velocity impact loading ."  Composites Science and Technology  71 (2011):  805-817.
    Hamdy A. Shehab; Mohamed A. Almetwally ; Salah Abd El-maged & Mohamed R. Emara,  "Effect of cement alternative on the mechanical properties of self-compacting concrete using variable aggregate types."  The Egyptian Int. Journal of Eng. Sciences &Technology,    (2011):  -.
    Maimí, P.; Turon, A.; Trias, D.  "Crack propagation in quasi-brittle two-dimensional isotropic lattices ."  Engineering Fracture Mechanics  78 (2011):  60-70.
    Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A.  "Matrix cracking and delamination in laminated composites. Part I: Ply constitutive law, first ply failure and onset of delamination ."  Mechanics of Materials  43 (2011):  169-185.
    Maimi,P.; Camanho,P.P.; Mayugo,J.A.; Turon, A.  "Matrix cracking and delamination in laminated composites. Part II: Evolution of crack density and delamination ."  Mechanics of Materials  43 (2011):  194-211.
    Martínez, V.; Güemes, A.; Trias, D.; Blanco, N.  "Numerical and Experimental Analysis of Stresses and Failure in T-Bolt joints."  Composite Structures  93 (2011):  2636-2645.
    Pérez-Aparicio, J. L.; Ripoll, L.   "Exact, integrated and complete solutions for composite flywheels."  Composite Structures  93 (2011):  1404-1415.
    Renart, J.; Blanco, N.; Pajares, E.; Costa, J.; Lazcano, S.  "Side Clamped Beam (SCB) hinge system for delamination tests in beam-type composite specimens ."  Composites Science and Technology  71 (2011):  1023-1029.
    Sebaey, T.A.; Blanco, N.; Lopes, C.S.; Costa, J.  "Numerical investigation to prevent crack jumping in Double Cantilever Beam tests of multidirectional composite laminates ."  Composites Science and Technology  71 (2011):  1587-1592.
    Sebaey, T.A.; Lopes, C.S.; Blanco, N.; Costa, J.  "Ant Colony Optimization for dispersed laminated composite panels under biaxial loading ."  Composite Structures  94 (2011):  31-36.
    Benavent-Climent A, Cahis X, Vico JM  "Interior wide beam-column connetions in existing RC frames subjected to lateral earthquake loading ."  Bulletin of Earthquake Engineering  8 (2010):  401-420.
    Catalán, A.; Benavent-Climent, A.; Cahís, X.  "Selection and scaling of earthquake records in assessment of structures in low-to-moderate seismicity zones ."  Soil Dynamics and Earthquake Engineering  30 (2010):  40-49.
    Franco, JM, Cahís X., Gracia L, Lòpez Almansa, F  "Experimental testing of a new anti-sesismic dissipator energy devide based on the plasticity of metals ."  Engineering Structures  32 (2010):  2672-2682.
    Lopez-Almansa, F.; Roca, P.; Sarrablo, V.; Cahís, X.; Canet, J.M.  "Experiments on Reinforced Brick Masonry Vaulted Light Roofs ."  ACI Structural Journal  107 (2010):  355-363.
    Mayugo, J.A.; Camanho, P.P.; Maimí, P.; Dávila, C.G.  "Analytical Modelling of Transverse Matrix Cracking of [±θ,90n]s Composite Laminates under Multiaxial Loading ."  Mechanics of Advanced Materials and Structures  17 (2010):  237-245.
    Miàs Oller, C.; Torres, Ll.; Turon, A.; Baena Muñoz, M.; Barris Peña, C.  "A Simplified method to obtain time-dependent curvatures and deflections of concrete members reinforced with FRP bars ."  Composite Structures  92 (2010):  1833-1838.
    Torres, Ll.; Barris Peña, C.  "L'Ús de materials compostos en el reforç intern d'estructures de formigó ."  Nivell: revista del Centre d'Estudis de la Construcció i Anàlisi de Materials   (2010):  21-25.
    Torres, Ll.; Miàs Oller, C.; Barris Peña, C.; Baena Muñoz, M.   "Flechas diferidas en vigas de hormigón con barras de materiales compuestos."  Cemento Hormigón  81 (2010):  36-41.
    Turon, A.; Camanho, P.P.; Costa, J.; Renart, J.  "Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness ."  Composite Structures  92 (2010):  1857-1864.
    Baena Muñoz, M.; Torres, Ll.; Turon, A.; Barris Peña, C.  "Experimental study of bond behaviour between concrete and FRP bars using a pull-out test ."  Composites. Part B, Engineering  40 (2009):  784-797.
    Barris Peña, C.; Torres, Ll.; Turon, A.; Baena Muñoz, M.; Catalan, A.  "An experimental study of the flexural behaviour of GFRP RC beams and comparison with prediction models ."  Composite Structures  91 (2009):  286-295.
    Benavent-Climent, A.; Cahís, X.; Catalan, A.  "Reinforced Concrete Exterior Waffle Flat Plate Plate-Column Connections Subjected to Lateral Earthquake Loading ."  Journal of Earthquake Engineering  13 (2009):  275-292.
    Benavent-Climent, A.; Cahís, X.; Zahran, R.  "Exterior wide beam-column connections in existing RC frames subjected to lateral earthquake loads ."  Engineering Structures  31 (2009):  1414-1424.
    Díaz, J.; Ripoll, L.; [et al.]  "The NEXT experiment."  Journal of Physics  179 (2009):  -.
    Gonzalez, Emilio V.; Maimí, P.; Turon, A.; Camanho, P.P.; Renart, J.  "Simulation of delamination by means of cohesive elements using an explicit finite element code."  Cmc-Computers Materials & Continua  9 (2009):  51-92.
    Lopes, C.S.; Camanho, P.P.; Gürdal, Z.; Maimí, P.; Gonzalez, Emilio V.  "Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations ."  Composites Science and Technology  69 (2009):  937-947.
    Palazzo, G.; López-Almansa, F., Cahís, X.; Crisafulli, F.  "A low-tech dissipative buckling restrained brace. Design, analysis, production and testing ."  Engineering Structures  31 (2009):  2152-2161.
    Baena Muñoz, M.; Torres, Ll.; Turon, A.; Barris Peña, C.  "Estudio de la adherencia entre armaduras de materiales compuestos de matríz polimérica (FRP) y hormigón."  Hormigón y Acero  59 (2008):  67-75.
    Benavent-Climent, A.; Cahís, X. ; Catalán, A.  "Seismic Behavior of Interior Connections in Existing Waffle-Flat-Plate Structures ."  Engineering Structures  30 (2008):  2510-2516.
    Blanco, N.; Gamstedt, E.K.; Costa, J.  "Mechanical hinge system for delamination tests in beam-type composite specimens ."  Composites Science and Technology  68 (2008):  1837-1842 .
    Dávila, C.G.; Camanho, P.P.; Turon, A.  "Effective simulation of delamination in aeronautical structures using shells and cohesive elements."  Journal of Aircraft  45 (2008):  663-672.
    Klein, J.; Obrador, M.; Gascons, N.; Reinkensmeyer, D.J.  "The effect of dynamic arm support on grip forces and steering errors during simulated driving."  International Journal Of Heavy Vehicle Systems  15 (2008):  449-459.
    Maimí, P.; Mayugo, J.A.; Camanho, P.P.  "A Three-dimensional Damage Model for Transversely Isotropic Composite Laminates ."  Journal of Composite Materials  42 (2008):  2717-2745.
    Camanho, P.P.; Maimí, P.; Dávila, C.G.  "Prediction of size effect in notched laminates using continuum damage mechanics ."  Composites Science and Technology  67 (2007):  2715-2727.
    Davila, C.G.; Camanho, P.P.; Turon, A.  "Cohesive elements for shells ."  NASA/TM  214869 (2007):  1-22.
    Maimí, P.; Camanho, P.P.; Mayugo, J.A.; Dávila, C.G.   "A Continuum Damage Model for Composite Laminates. Part I-Constitutive model ."  Mechanics of Materials  39 (2007):  897-908.
    Maimí, P.; Camanho, P.P.; Mayugo, J.A; Dávila, C.G.  "A Continuum Damage Model for Composite Laminates. Part II-Computational implementation and validation ."  Mechanics of Materials  39 (2007):  909-919.
    Trias, D.; Garcia, R.; Costa, J.; Blanco, N.; Hurtado, J.E.  "Quality control of CFRP by means of digital image processing and statistical point pattern analysis ."  Composites Science and Technology  67 (2007):  2438-2446.
    Turon, A.; Dávila, C.G.; Camanho, P.P.; Costa, J.  "An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models ."  Engineering Fracture Mechanics  74 (2007):  1665-1682.
    Barbero, E.J.; J. Trovillion, J.; Mayugo, J.A.; Sikkild, K.K.   "Finite element modeling of plain weave fabrics from photomicrograph measurements ."  Composite Structures  73 (2006):  41-52.
    Blanco, N.; Gamstedt, E.K.; Costa, J.; Trias, D.  "Analysis of the Mixed-Mode End Load Split delamination test ."  Composite Structures  76 (2006):  14-20.
    Blanco, N.; Turon, A.; Costa, J.  "An exact solution for the determination of the mode mixture in the mixed-mode bending delamination test. ."  Composites Science and Technology  66 (2006):  1256-1258.
    Trias, D.; Costa, J.; Fiedler, B.; Hobbiebrunken, Th.; Hurtado, J.E.   "A two-scale method for matrix cracking probability in fibre-reinforced composites based on a statistical representative volume element ."  Composites Science and Technology  66 (2006):  1766-1777.
    Trias, D.; Costa, J.; Mayugo, J.A. ; Hurtado, J.E.   "Random models versus periodic models for fibre reinforced composites ."  Computational Materials Science  38 (2006):  316-324.
    Trias, D.; Costa, J.; Turon, A.; Hurtado, J.E.   "Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymers ."  Acta Materialia  54 (2006):  3471-3484.
    Turon, A.; Camanho, P.P.; Costa, J.; Dávila, C.G.  "A damage model for the simulation of delamination in advanced composites under variable-mode loading ."  Mechanics of Materials  38 (2006):  1072-1089.
    Turon, A.; Costa, J.; Camanho, P.P.; Dávila, C.G.  "Simulation of delamination in composites under high-cycle fatigue loading ."  Composites. Part A, Applied science and manufacturing  38 (2006):  2270-2282.
    Turon, A.; Costa, J.; Camanho, P.P.; Davila, C.G.  "Simulation of delamination propagation in composites under high-cycle fatigue by means of cohesive-zone models."  NASA/TM  214532 (2006):  1-28.
    Costa, J.; Turon, A.; Trias, D.; Blanco, N.; Mayugo, J.A.   "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part II: Stiffness reduction in environment sensitive fibres under fatigue ."  Composites Science and Technology  65 (2005):  2269-2275.
    Turon, A.; Costa, J.; Maimí, P.; Trias, D.; Mayugo, J.A.  "A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation ."  Composites Science and Technology  65 (2005):  2039-2048.
    Turon, A.; Davila, C.G.; Camanho, P.P.; Costa, J.  "An engineering solution for using coarse meshes in the simulation of delamination with cohesive zone models ."  NASA/TM  213547 (2005):  1-21.
    Blanco, N.; Gamstedt, E.K.; Asp, L.E.; Costa, J.  "Mixed-mode delamination growth in carbon-fibre composite laminates under cycling loading ."  International Journal of Solids and Structures  41 (2004):  4219-4235.
    Bozzo, L.M.; Torres, Ll.  "A proposed semi-prefabricated prestressed composite steel-concrete slab."  Proceedings of the Institution of CIVIL Engineers-Structures and Buildings  157 (2004):  309-317.
    Torres, Ll.; López Almansa, F.; Bozzo, L.M.  "Tension-stiffening model for cracked flexural concrete members."  Journal of Structural Engineering-Asce  130 (2004):  1242-1251.
    Turon, A.; Camanho, P.P.; Costa, J.; Davila, C.G.  "An interface damage model for the simulation of delamination under variable-mode ratio in composite materials ."  NASA/TM   (2004):  1-32.
    Pérez Aparicio, J.L.; Ripoll, L.;   "Solución generalizada para piezas cilíndricas de material compuesto ."  Materiales compuestos  1 (2003):  801-809.
    Ripoll, L.; Pérez Aparicio, J.L.   "Minimización de tensiones en cilindros bobinados mediante pretensado térmico."  Materiales compuestos  1 (2003):  69-77.
    Torres, Ll.; Cahís, X.; López, F.; Bozzo, L.M.  "Modelo de comportamiento en servicio para estructuras reticulares de hormigón. Parte I: descripción del modelo y ejemplos de aplicación ."  Hormigón y Acero  227 (2003):  43-53.
    Torres, Ll.; Cahís, X.; López, F.; Bozzo, L.M.  "Modelo de comportamiento en servicio para estructuras reticulares de hormigón. Parte II: diagrama tensión –deformación para elementos fisurados a flexión ."  Hormigón y Acero  227 (2003):  55-65.
    Torres, Ll.; López Almansa, F.; Cahís, X.; Bozzo, L.M.  "A numerical model for sequential construction, repairing and strenghtening of 2-D concrete frames ."  Engineering Structures  25 (2003):  323-336.
    Blanco, N.; Corbella, B.; Costa, J.; Renart, J.; Mayugo, J.A.  "Comportamiento de laminados: modelo constitutivo de daño uniaxial para un haz de fibras de vidrio ."  Anales de Mecánica de la Fractura  19B (2002):  433-438.
    Roura, P.; Costa, J.  "Radiative thermal emission from nanoparticles: a reversed story from quantum to classical theory ."  European Journal of Physics  23 (2002):  191-203.
    Roura, P.; Costa, J.; Farjas, J.  "Is sintering enhanced under non-isothermal conditions? ."  Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing  337 (2002):  248-253.
    Cahís, F.X.; Torres, Ll.; Bozzo, L.M.  "Nuevo disipador para edificación sismoresistente. 1ª parte: caracterización y modelos de predicción."  Hormigón y Acero  219 (2001):  91-101.
    Cahís, X.; Torres, Ll.; Bozzo, L.M.  "Nuevo disipador para edificación sismoresistente. 2ª parte: comportamiento de estructuras duales de un grado de libertad con disipadores ."  Hormigón y Acero  220 (2001):  57-67.
    Bertran, E.; Costa, J.; Viera, G.; Andújar, J.L.; Canillas, A.; Pascual, E.  "Ultrafine particles produced by plasma enhanced chemical vapor deposition -from SiH4, CH4, NH3 and B2H6 gas mixtures- for nanostructured ceramics applications

    ."  Contributions to Science  1 (1999):  53-61.
    Roura, P.; Costa, J.; López-de-Miguel M.; Garrido, B.; Fort, J.; Morante, J.R.; Bertran, E.  "Blackbody emission in nanostructured materials."  Journal of Luminescence  80 (1999):  519-522.
    Viera, G.; Costa, J.; Compte, F.J.; García-Sanz, E.; Andújar, J.L.; Bertran, E.;  "Accurate electrical measurements for in situ diagnosis of RF discharges in plasma CVD processes ."  Vacuum  53 (1999):  1-5.
    Viera, G.; Costa, J.; Roura, P.; Bertran, E.  "High nucleation rate in pure SiC nanometric powder by room temperature plasmas and post-thermal treatments combination ."  Diamond and Related Materials  8 (1999):  364-368.
    Viera, G.; García-Caurel, E.; Costa, J.; Andújar, J.L.; Bertran, E.  "Nanoparticles of Si-C-N from low temperature RF plasmas: selective size, composition and structure ."  Applied Surface Science  144-145 (1999):  702-707.
    Viera, G; Sharma, S.N.; Andújar, J.L.; Zhang, R.Q.; Costa, J.; Bertran, E.  "Nanometric powder of stoichiometric silicon carbide produced in square-wave modulated RF glow discharges

    ."  Vacuum  52 (1999):  183-186.
    Bertran, E.; Sharma, S.N.; Viera, G.; Costa, J.; St'ahel, P.; Roca i Cabarrocas, P.  "Effect of the nanoparticles on the structure and crystallization of amorphous silicon thin films produced by rf glow discharge."  Journal of Materials Research  13 (1998):  2476-2479.
    Bozzo, L.M./ Barbat, A./ Torres, Ll.  "Application of Qualitative Reasoning in Engineering."  Applied Artificial Intelligence  12 (1998):  29-48.
    Costa, J.; Roura, P.; Morante, J.R.; Bertran, E.  "Blackbody emission under laser excitation of silicon nanopowder produced by plasma-enhanced chemical-vapour deposition ."  Journal of Applied Physics  83 (1998):  7879-7885.
    Roca i Cabarrocas, P.; Hamma, S.; Sharma, S.N., Viera, G.; Bertran, E.; Costa, J.   "Nanoparticle formation in low-pressure silane plasmas: bridging the gap between a-Si:H and μc-Si films

    ."  Journal of non-Crystalline Solids  227-230 Part 2 (1998):  871-875.
    Costa, J.; Campmany, J.; Canillas, A.; Andújar, J.L.; Bertran E.  "In situ fast ellipsometric analysis of repetitive surface phenomena

    ."  Review of Scientific Instruments  68 (1997):  3135-3139.
    Costa, J.; Suñol, J.J.; Saurina, J.; Roura, P.; Martínez, S.; Viera, G.; Bertran, E.  "Calorimetric study of the thermal induced transformations of ultrafine silicon carbide powder produced by RF glow discharge ."  Key Engineering Materials  132 (1997):  145-148.
    Roura, P.; Costa, J.; Morante, J.R.; Bertran, E.  "Gas collisions and pressure quenching of the photoluminescence of silicon-nanopowder grown by plasma-enhanced chemical vapor deposition ."  Journal of Applied Physics  81 (1997):  3290-3293.
    Viera, G.; Sharma S.N.; Costa, J.; Zhang, R.Q.; Andújar, J.L.; Bertran, E.   "Effects of thermal and laser annealing on silicon carbide nanopowder produced in radio frequency glow discharge ."  Diamond and Related Materials  6 (1997):  1559-1563.
    Viera, G.; Sharma, SN.; Costa, J.; Zhang, RQ.; Andújar, JL.; Bertran, E.  "Silicon carbide nanoparticles for advanced materials produced in radio frequency modulated glow discharges

    ."  Vacuum  48 (1997):  665-668.
    Bertran, E.; Costa, J.; Viera, G.; Zhang, R.Q.  "Production of nanometric particles in RF glow discharges of silane and methane gas mixture."  Journal Of Vacuum Science & Technology a  14 (1996):  567-571.
    Costa, J.; Bertran, E.; Andújar J.L.  "Production of Boron Nitride Nanometric Powder by PECVD. Microstructural Characterization."  Diamond and Related Materials  5 (1996):  544-547.
    Costa, J.; Roura, P.; Canillas, A.; Pascual, E.; Morante, J.R.; Bertran, E.  "On the structural origin of the photoluminescence in silicon powder produced in PECVD processes ."  Thin Solid Films  276 (1996):  96-99.
    Zhang, R.Q.; Costa, J.; Bertran, E.;  "Role of structural saturation and geometry in the luminescence of silicon-based nanostructured materials."  Physical Review B  53 (1996):  7847-7850.
    Costa, J.; Roura, P.; Sulimov, N.; Sardin, G.; Morante, J.R.; Bertran, E.  "Pressure dependence of PL in amorphous silicon nanopowder produced by PECVD.."  Materials Science and Technology  11 (1995):  707-710.
    Roura, P.; Costa, J.; Sardin, G.; Morante, J.R.; Bertran, E.  "Photoluminescence in silicon powder grown by plasma-enhanced chemical- vapor deposition: evidence of a multistep-multiphoton excitation process ."  Physical Review B  50 (1995):  18124-18133.
    Roura, P.; Costa, J.; Sulimov, N.A.; Morante, J.R.; Bertran, E.  "Pressure influence on the decay of the phololuminescence in Si-nanopowder gromw by plasma enhanced chemical vapour deposition. ."  Applied Physics Letters  67 (1995):  2830-2832.
    Bertran, E.; Costa, J.; Sardin, G.; Campmany, J.; Andujar, J.L.; Canillas, A.  "Effects of plasma processing on the microstructural properties of silicon powders."  Plasma Sources Science & Technology  3 (1994):  348-354.
    Costa, J.; Roura, P.; Sardin, G.; Morante, J.R.; Bertran, E.  "Unusual photoluminescence properties in amorphous silicon nanopowder produced by plasma enhanced chemical vapor deposition."  Applied Physics Letters  64 (1994):  463-465.
    Costa, J.; Sardin, G.; Campmany, J.; Bertran, E.  "Preparation of nanoscale amorphous silicon based powder in a square-wave-modulated rf plasma reactor ."  Vacuum  45 (1994):  1115-1117.
    Campmany, J.; Andujar, J.L.; Canillas, A.; Costa, J.; Bertran, E.  "Optical, vibrational and compositional study of amorphous silicon oxynitride thin films grown by an RF plasma using N2O + SiH4 gas mixtures."  Applied Surface Science  70,71 (1993):  695-700.
    Campmany, J.; Bertran, E.; Canillas, A.; Andujar, J.L.; Costa, J.  "Error minimization method for spectroscopic and phase-modulated ellipsometric measurements on highly transparent thin films."  Journal of the Optical Society of America A-Optics, Image, Science, and Vision  10 (1993):  713-718.
    Campmany, J.; Canillas, A.; Andujar, J.L.; Costa, J.; Bertran, E.  "In situ real-time ellipsometric study of the growth of r.f. plasma deposited amorphous hydrogenated silicon oxynitride thin films ."  Thin Solid Films  228 (1993):  137-140.
    Campmany, J.; Canillas, A.; Andujar, J.L.; Costa, J.; Bertran, E.  "Study of thin films of transparent electronic materials by phase-modulated spectroellipsometry ."  Thin Solid Films  233 (1993):  223-226.

     

    Article pendent de publicació
    M. Cabello; A. Turon; J. Zurbitu; J. Renart; C. Sarrado; F. Martínez  "Progressive failure analysis of DCB bonded joints using a new elastic foundation coupled with a cohesive damage model."  International Journal of Plasticity   (2016):  -.

     

    Proceeding
    S. Cebrian,,. L.Ripoll  "Radon and material radiopurity assessment for the NEXT double beta decay experiment."  AIP Conference Proceedings  1672 (2015):  -.
    Ripoll, L.; Pérez Aparicio, J.L.; Maimí, P.   "Solving stress equations in composite cylinders."  16th European Conference on Composite Materials, ECCM 2014   (2014):  -.
    Ripoll, L.; Pérez Aparicio, J.L.   "Efecto perjudicial del transitorio en la hidratación del material compuesto aplicado volantes de inercia."  Materiales compuestos   (2007):  -.
    Ripoll, L.; Pérez Aparicio, J.L.   "Análisis de las tensiones axiales en volantes de inercia de materiales compuestos."  Materiales compuestos   (2005):  -.
    Ripoll, L.; Ciurana, J.; Garcia-Romeu, M.L.  "Aplicación de la acotación funcional para el rediseño provocado por avería del acoplamiento motor-reductor."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  2 (2000):  1011-1016.
    Ripoll, L.; Martínez, V.; Pla, J.  "Valores experimentales del coeficiente de rozamiento en uniones pretensadas empleando tornillos con recubirmiento orgánico."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  2 (2000):  1105-1110.

     

     

    Source of the data: System of information GREC

    GREFEMA, Fluids, Energy & Environment Group

    Journal publications

      Article
      Bové, J.; Puig-Bargués, J.; Arbat, G.; Duran-Ros, M.; Pujol, T.; Pujol, J.; Ramírez de Cartagena, F.  "Development of a new underdrain for improving the efficiency of microirrigation sand media filters."  Agricultural Water Management  179 (2017):  296-305.
      Eduard Massaguer Colomer; Albert Massaguer Colomer; Toni Pujol Sagaró; Jose Ramon Gonzalez Castro; Lino Montoro Moreno  "Modelling and analysis of longitudinal thermoelectric energy harvesters considering series-Parallel interconnection effect."  Energy   (2017):  -.
      Quim Tarrés;Alexandre Deltell;F. Xavier Espinach;M. Àngels Pèlach;Marc Delgado-Aguilar;Pere Mutjé  "Magnetic Bionanocomposites from cellulose nanofibers: fast, simple and effective production method."  International Journal of Biological Macromolecules  99 (2017):  29-36.
      Pujol, T.; Arbat, G.; Bové, J.; Puig-Bargués, J.; Duran-Ros, M.; Velayos, J.; Ramírez de Cartagena, F.  "Effects of the underdrain design on the pressure drop in sand filters."  Biosystems Engineering  150 (2016):  1-9.
      Aguilera, Inmaculada;Foraster, Maria;Basagaña, Xavier;Corradi, Elisabetta;Deltell, Alexandre;Morelli, Xavier;Phuleria, Harish C;Ragettli, Martina S;Rivera, Marcela;Thomasson, Alexandre;Slama, Remy;Künzli, Nino  "Application of land use regression modelling to assess the spatial distribution of road traffic noise in three European cities."  Journal Of Exposure Science And Environmental Epidemiology  25 (2015):  97-105.
      B Comas, A Carmona, T Pujol  "Experimental study of the channel effect on the flame spread over thin solid fuels."  Fire Safety Journal   (2015):  162-173.
      Bové, J.; Arbat, G.; Duran-Ros, M.; Pujol, T.; Velayos, J.; Ramírez de Cartagena, F.; Puig-Bargués, J.   "Pressure drop across sand and recycled glass media used in micro irrigation filters."  Biosystems Engineering  137 (2015):  55-63.
      Bové, J.; Arbat, G.; Pujol, T.; Duran-Ros, M.; Ramírez de Cartagena, F.; Velayos, J.; Puig-Bargués, J.   "Reducing energy requirements for sand filtration in microirrigation: improving the underdrain and packing."  Biosystems Engineering  140 (2015):  67-78.
      Deltell, A; Escoda, L ; Saurina, J; Suñol, JJ  "Martensitic transformation in Ni-Mn-Sn-Co Heusler alloys."  Metals  5 (2015):  695-705.
      Massaguer Colomer, Albert; Massaguer Colomer, Eduard; Pujol Sagaró, Toni; Montoro Moreno, Lino; Comamala Laguna, Martí; Gonzalez Castro, Josep Ramon  "Electrically tunable thermal conductivity in thermoelectric materials: Active and passive control."  Applied Energy  154 (2015):  709-717.
      Massaguer Colomer, Eduard; Massaguer Colomer, Albert; Gonzalez Castro, Josep Ramon; Montoro Moreno, Lino  "Modeling analysis of longitudinal thermoelectric energy harvester in low temperature heat recovery applications."  Applied Energy  140 (2015):  184-195.
      T Pujol; AK Vashisht; J Ricart; D Culubret; J Velayos  "Hydraulic efficiency of horizontal waterwheels: Laboratory data and CFD study for upgrading a western Himalayan watermill."  Renewable Energy  83 (2015):  576-586.
      X. Morelli;M. Foraster;I. Aguilera;X. Basagana;E. Corradi;A. Deltell;R. Ducret-Stich;H. Phuleria;M.S. Ragettli;M. Rivera;A. Thomasson;N. Künzli;R. Slama  "Short-term associations between traffic-related noise, particle number and traffic flow in three European cities."  Atmospheric Environment  103 (2015):  25-33.
      Foraster M; Künzli N; Aguilera I; Rivera M; Agis D; Vila J; Bouso L; Deltell A; Marrugat J; Ramos R; Sunyer J; Elosua R; Basagaña X  "High Blood Pressure and Long-Term Exposure to Indoor Noise and Air Pollution from Road Traffic."  Environmental Health Perspectives  122 (2014):  1193-1200.
      Maria Foraster;Xavier Basagaña;Inmaculada Aguilera;Marcela Rivera;David Agis;Laura Bouso;Alexandre Deltell;Jaume Marrugat;Rafel Ramos;Jordi Sunyer;Joan Vila;Roberto Elosua;Nino Künzli   "Association of Long-Term Exposure to Traffic-Related Air Pollution with Blood Pressure and Hypertension in an Adult Population-Based Cohort in Spain (the REGICOR Study).."  Environmental Health Perspectives  122 (2014):  404-441.
      Massaguer Colomer, Eduard; Massaguer Colomer, Albert; Montoro Moreno, Lino; Gonzalez Castro, Josep Ramon  "Development and validation of a new TRNSYS type for the simulation of thermoelectric generators."  Applied Energy  134 (2014):  65-74.
      Arbat, G.; Puig-Bargués, J.; Duran-Ros, M.; Ramírez de Cartagena, F.; Pujol, T.; Montoro, L.; Barragán, J.   "Hydrodynamic behaviour of the underdrains in microirrigation sand media filters using CFD softwater ."  Acta Horticulturae  1008 (2013):  85-89.
      B. Comas; T. Pujol  "Energy balance models of downward combustion of parallel thin solid fuels and comparison to experiments."  Combustion Science and Technology  185 (2013):  1820-1837.
      Comas B; Pujol T  "Flame front speed and onset of instability in the burning of inclined thin solid fuel samples."  Physical Review E  88 (2013):  063019-1-063019-6.
      G. Arbat; T. Pujol; J. Puig-Bargués; M. Duran-Ros; L. Montoro; J. Barragán; F. Ramírez de Cartagena  "An experimental and analytical study to analyze hydraulic behavior of nozzle-type underdrains in porous media filters ."  Agricultural Water Management  126 (2013):  64-74.
      Planas Lladó, Anna; Feliu Soley, Lídia; Fraguell Sansbelló, Rosa Maria; Arbat Pujolras, Gerard; Pujol Planella, Joan; Roura-Pascual, Núria; Josep Suñol Martínez, Joan; Montoro Moreno, Lino  "Student perceptions of peer assessment: an interdisciplinary study ."  Assessment & Evaluation In Higher Education  39 (2013):  592-610.
      Pujol, T.; Montoro, L.; Pelegrí, M.; González, J.R.  "Learning hydraulic turbomachinery with computational fluid dynamics (CFD) codes ."  Computer Applications in Engineering Education  21 (2013):  684-690.
      T. Pujol  "Analytical model for the downward flame spread over a thermally thin fuel into an opposed flow ."  Combustion Science and Technology  185 (2013):  794-816.
      B. Comas, T. Pujol,  "Experimental study of the effects of side-edge burning in the downward flame spread of thin solid fuels."  Combustion Science and Technology  184 (2012):  489-504.
      Fort, J; Pujol, T; vander Linden, M  "Modelling the Neolithic transition in the Near East and Europe ."  American Antiquity  77 (2012):  203-220.
      Arbat, G.; Pujol, T.; Puig-Bargués, J.; Duran-Ros, M.; Barragán, J.; Montoro, L.; Ramírez de Cartagena, F.  "Using computational fluid dynamics to predict head losses in the auxiliary elements of a microirrigation sand filter."  Transactions Of The Asabe  54 (2011):  1367-1376.
      Foraster, Maria;Deltell, Alexandre;Basagaña, Xavier;Medina-Ramon, Mercedes;Aguilera, Inmaculada;Bouso, Laura;Grau, Maria;Phuleria, Harish C.;Rivera, Marcela;Slama, Rémy;Sunyer, Jordi;Targa, Jaume;Künzli, Nino  "local determinants of road traffic noise levels versus determinats of air pollution levels in a mediterranean city ."  Environmental Research  111 (2011):  177-183.
      Pujol, T., Comas, B.  "Analytical expressions for the flame front speed in the downward combustion of thin solid fuels and comparison to experiments ."  Physical Review E  84 (2011):  026306-026310.
      Pujol, T.; Montoro, L.; Silva, X.  "Hydraulic power of slow-rotating waterwheels: a novel analytical approximation ."  Proceedings of the Institution of Mechanical Engineers. Part C, Journal of Mechanical Engineering Science  225 (2011):  1495-1506.
      Rivera, Marcela; Zechmeister, Harald; Medina-Ramón, Mercedes; Basagaña, Xavier; Foraster, Maria; Bouso, Laura; Moreno, Teresa; Solanas, Pascual; Ramos, Rafael; Köllensperger, Gunda; Deltell, Alexandre; Vizcaya, David; Künzli,  "Monitoring of heavy metal concentrations in home outdoor air using moss bags."  Environmental Pollution  159 (2011):  954-962.
      T. Pujol, B. Comas  "Bounds for downward flame spread rate in solid fuels and comparison to experiments."  Combustion Science and Technology  183 (2011):  1083-1106.
      Pujol, T.; Montoro, L.  "High hydraulic performance in horizontal waterwheels ."  Renewable Energy  35 (2010):  2543-2551.
      Pujol, T.; Solà, J.; Montoro, L.; Pelegrí, M.  "Hydraulic performance of an ancient Spanish watermill ."  Renewable Energy  35 (2010):  387-396.
      Foraster, Maria; Medina-Ramón, Mercedes; Basagaña, Xavier; Bouso, Laura; Elosua, Roberto; Juvinyà, Dolors; Rivera, Marcela; Santos-Garcés, Eva; Kuenzli, Nino; Deltell, Alexandre  "Noise and air pollution correlation and its determinants in the city of Girona ."  Epidemiology  20 (2009):  S180-.
      Pujol, T.; Fort, J.; Montoro, L.; Suñol, J.J.  "Generalized analytical expressions for the burning velocity in a combustion model with non-constant transport coefficients and several specific heats ."  Physica. A, Statistical Mechanics and its Applications  388 (2009):  4959-4972.
      Pujol, T.; Fort, J.; Montoro, L.; Suñol, J.J.  "Generalyzed analytical expressions for the burning velocity in a combustion model with non-constant transport coefficients and several specific heats ."  Physica. A, Statistical Mechanics and its Applications  388 (2009):  4959-4972.
      Rivera, Marcela; Zechmeister, Harald; Medina-Ramón, Mercedes; Basagaña, Xavier; Bouso, Laura; Foraster, Maria; Deltell, Alexandre; Targa, Jaume; Solanas, Pascual; Ramos, Rafael; Vizcaya, David; Kuenzli, Nino  "Estimation of Heavy Metals Concentrations in Outdoor Air Using Mosses ."  Epidemiology  20 (2009):  S77-.
      Armengol Roura, J.; Calbó, J.; Pujol, T.; Roura, P.  "Bernoulli correction to viscous losses : Radial flow between two parallel discs ."  American Journal of Physics  76 (2008):  730-737.
      Fort, J.; Pujol, T.  "Progress in front propagation research ."  Reports on Progress in Physics  71 (2008):  086001-086041.
      Pardini, G.; Gispert, M.; Jordana, R.; Velayos, J.  "Experimental use of composted grape seed and olive mill residues for amelioration of fertility and structural stability of soils."  Compost Science and Utilization  16 (2008):  61-68.
      Pujol, T.; Fort, J.; González Castro, J.R.; Montoro, L.; Pelegrí, M.  "Bounds for the speed of combustion flames: the effect of mass diffusion ."  Physica. A, Statistical Mechanics and its Applications  387 (2008):  1987-1998 .
      Suñol, J.J.; Escoda, L.; Fort, J.; Pérez-Losada, J.; Pujol, T.  "Structural and magnetic properties of a nanocrystalline Fe75Nb10Si5B10 alloy produced by mechanical alloying ."  Materials Letters  62 (2008):  1673-1676.
      Fort, J.; Pujol, T.  "Time-delayed fronts from biased random walks ."  New Journal of Physics  9 (2007):  234-235.
      Macián, V.; Payri, R.; Tormos, B.; Montoro, L.  "Applying analytical ferrography as a technique to detect failures in Diesel engine fuel injection systems ."  Wear  260 (2006):  562-566.
      Pujol, A.; Fort, J.; Méndez, V.  "Consequences of inter-specific competition among multiple adaptive species in Daisyworld ."  Theoretical and Applied Climatology  81 (2005):  137-147.
      Fort, J.; Campos, D.; González, J.R.; Velayos, J.   "Bounds for the propagation speed of combustion flames."  Journal of Physics A: Mathematical and General  37 (2004):  7185-7198.
      Fort, J.; Pujol, T.; Cavalli-Sforza, L.L.  "Paleolithic populations waves of advance."  Cambridge Archaeologial Journal  14 (2004):  53-61.
      Pujol, T.  "Effects of convection on the removal of the multiplicity of stable states in 1-D vertical models."  Quarterly Journal of the Royal Meteorological Society  130A (2004):  945-962.
      Méndez, V.; Fort, J.; Pujol, T.  "Effect of initial conditions on the speed of reaction-diffusion fronts."  Physical Review E  67 (2003):  016213-.
      Méndez, V.; Fort, J.; Pujol, T.   "The speed of reaction-diffusion wavefronts in nonsteady media."  Journal of Physics A: Mathematical and General  36 (2003):  3983-3993.
      Ozawa, H.; Ohmura, A.; Lorenz, R.; Pujol, T.  "The second law of thermodynamics and the global climate system - A review of the maximum entropy production principle."  Reviews of Geophysics  41 (2003):  4/1018-.
      Pujol, T.  "Eddy heat diffusivity at maximum dissipation in a radiative-convective one-dimensional climate model."  Journal of the Meteorological Society of Japan  81 (2003):  305-315.
      Pujol, T.; North, G. R.  "Analytical investigation of semigray atmospheres in radiative equilibrium: sensitivity analysis and the runaway greenhouse point."  Tellus A  54 (2003):  218-227.
      V. Macián Martínez, B. Tormos Martínez, P. Olmeda González, L. Montoro Moreno, E. Anubla Lucía.  "Results and Benefits of an Oil Analysis Programme for Railway Locomotive Diesel Engines.."  Insight  45 (2003):  402-406.
      V. Macián Martínez, B. Tormos Martínez, P. Olmeda González, L. Montoro.  "Analytical Approach to Wear Rate Determination for Internal Combustion Engine Condition Monitoring Based on Oil Analysis.."  Tribology International   (2003):  -.
      Funoses, V.; Arnau, J.; Corretger, J.M.; Deltell, A.  "Proyecto de una instalación solar térmica para un hotel de 3 estrellas."  El Instalador  1 (2002):  55-61.
      Méndez, V.; Pujol, T.; Fort, J.  "Dispersal probability distributions and the wavefront speed problem."  Physical Review E  65 (2002):  041109-.
      Pujol, T.  "Effects of the non-gray absorption in a simple radiative equilibrium model."  Planetary and Space Science  50 (2002):  1049-1054.
      Pujol, T.  "The consequences of maximum thermodynamic efficiency in Daisyworld."  Journal of Theoretical Biology  217 (2002):  53-60.
      Pujol, T.; Fort, J.  "States of maximum entropy production in a one-dimensional vertical model with convective adjustment."  Tellus A  54 (2002):  363-369.
      Pujol, T.; Fort, J.  "The effect of atmospheric absorption of sunlight on the runaway greenhouse point."  Journal of Geophysical Research  107 (2002):  4566-.
      Pujol, T.; North, G. R.  "Runaway greenhouse in a simple model."  Bulletin of the American Meteorological Society  83 (2002):  1455-1456.
      Pujol, T.; North, G.R.   "Runaway Greenhouse Effect in a Semigray Radiative-Convective Model ."  Journal of the Atmospheric Sciences  59 (2002):  2801-2810.
      Arnau, Josep  "L'ús de l'aigua residual depurada."  Eficiència energètica  151 (2000):  16-17.
      Fort, J., Pujol, T., Cukrowski, A.S.  "Several-temperature systems: extended irreversible thermodynamics and thermal wavefront propagation."  Journal of Physics A-Mathematical and General  33 (2000):  6953-6973.
      Pujol, T.; Llebot J.E.  "Extremal climatic states simulated by a 2-Dim model. Part I: Sensitivity of the model and present state."  Tellus A  52 (2000):  422-439.
      Pujol, T.; Llebot J.E.  "Extremal climatic states simulated by a 2-Dim model. Part II: Different climatic scenarios."  Tellus A  52 (2000):  440-454.
      Fort, J., Llebot, J. E., Pujol, T.  "Extended thermodynamics of heat transport and energy equilibration in radiative systems."  Journal of Physics A-Mathematical and General  32 (1999):  3095-3104.
      Pujol, T., Llebot, J. E., Fort, J.  "Greenhouse gases and climatic states of minimum entropy production."  Journal of Geophysical Research  104 (1999):  24257-24263.
      Pujol, T., Llebot, J.E.  "Extremal principle of entropy production in the climate system."  Quarterly Journal of the Royal Meteorological Society  125 (1999):  79-90.
      Pujol, T., Llebot, J.E.  "Periodic solutions in low-dimensional climatic models."  Journal of Climate  12 (1999):  325-333.
      Pujol, T., Llebot, J.E.  "Second differential of the entropy as a criterion for the stability in low-dimensional climate models."  Quarterly Journal of the Royal Meteorological Society  125 (1999):  91-106.
      Pujol, T., Llebot, J.E.  "Entropy production in thermodynamic climate models."  Journal of non-Equilibrium Thermodynamics  23 (1998):  62-86.

       

      Proceeding
      Jollyn, I.T.; Pujol, Toni; De Paepe, M.; Massaguer, Albert; Montoro, Lino  "Plate fin heat sink modelling and design considerations for thermoelectric generators."  Renewable Energy & Power Quality Journal  1 (2017):  -.
      Luo, Ningsu; Pujol, Toni; Pacheco, L; González, JR; Bramon, J.V.; Massaguer, Albert  "Development of small-scale wind energy systems adaptable to climatic conditions using chattering torque control - PI pitch control and CAES strategy."  Renewable Energy & Power Quality Journal  1 (2017):  -.
      Massaguer, Albert; Massaguer, Eduard; Comamala, Martí; Cabot, Andreu; González, J.R.; Deltell, A  "Experiments and Simulations of an Automotive Exhaust Thermoelectric System."  Renewable Energy & Power Quality Journal  1 (2017):  -.
      Massaguer, Albert; Massaguer, Eduard; Comamala, Martí; Cabot, Andreu; Ricart, Josep; Deltell, A  "Experimental analysis of an automotive thermoelectric generator under different engine operating regimes."  Renewable Energy & Power Quality Journal  1 (2017):  -.
      Montoro, Lino; Massaguer, Albert; Massaguer, Eduard; Comamala, Martí; Fernández, R; Deltell, A  "Utilization of residual heat in Diesel engines, CFD simulation of a thermoelectric generator."  Renewable Energy & Power Quality Journal  1 (2017):  -.
      Ruiz, Ivan; Borrelli, M; Pujol, Toni; Luo, Ningsu; Pacheco, L; Massaguer, Albert; Montoro, Lino  "Effective thermal conductance of thermoelectric generator modules."  Renewable Energy & Power Quality Journal  1 (2017):  -.
      Massaguer Colomer, Albert; Massaguer Colomer, Eduard; Pujo Sagaró, Toni; Comamala Laguna, Martí; Valayos Solé, Joaquim   "Blade shape influence on aerodynamic efficiency of a Magnus wind turbine using particle image velocimetry ."  Renewable Energy & Power Quality Journal   (2014):  -.
      Massaguer Colomer, Albert; Melendez, Joaquim; Herraiz, Sergio  "Energy consumption profiles in buildings."  Renewable Energy & Power Quality Journal   (2014):  -.
      Massaguer Colomer, Eduard; Gonzalez Castro, J.R.; Massaguer Colomer, Albert; Ricart Ferrer, Josep; Lorenz, Sofia   "The potential of Earth-to-Air Heat Exchangers for reducing energy demand in Spanish dwellings ."  Renewable Energy & Power Quality Journal   (2014):  -.
      Massaguer Colomer, Eduard; Montoro Moreno, Lino; Massaguer Colomer, Albert; Deltell Carbonell, Alex; Lorenz, Sofia   "Study of the influence of hot water consumption pattern on SHW systems under solar Spanish regulation compliance using TRNSYS ."  Renewable Energy & Power Quality Journal   (2014):  -.

       

       

      Source of the data: System of information GREC

      GREP, Group in Engineering of Product, Process and Production

      Journal publications

        Abstract
        Giménez Leal, G.; Casadesus, M.; Valls, J.  "La introducción de nuevas tecnologías de la información en empresas altamente automatizadas."  Revista Valenciana de Estudios Económicos   (1999):  437-438.

         

        Altres
        Vázquez, E.; Ciurana, J.; Lopez de la Calle, N.  "Crisis o Reconversión. Una vía para mitigar: reconversión del fresado."  IMHE   (2009):  42-47.

         

        Article
        Bagudanch, I.; Vives-Mestres, M.; Sabater, M.; Garcia-Romeu, M.L.  "Polymer incremental sheet forming process: temperature analysis using response surface methodology."  Materials and Manufacturing Processes  32 (2017):  44-53.
        Dalilis Escobar Rivera; Jorge Isvel Salazar Marrero; Alexandra Simon Villar  "Auditors selection and audit team formation in integrated audits."  QUALITY access to success  18 (2017):  -.
        Castellano, J.; Ribera, A.; Ciurana, J.  "Integrated system approach to evaluate social, environmental and economics impacts of buildings for users of housings."  Energy and Buildings  123 (2016):  106-118.
        Castelló, J., Giménez, G. and De Castro, R.  "ISO 9001 aspectes related to perfomance and their level of implementation."  Journal of Industrial Engineering and Management  9 (2016):  73-89.
        Ciurana, J., Rodríguez, C.A.  "Trends in nanomaterials and processing for drug delivery of polyphenols for cancer and other treatments."  Current Drug Targets  17 (2016):  1-12.
        Cots, S. ; Casadesús, M. ; Marimon, F.  "Benefits of ISO 20000 IT service management certification."  Information Systems And e-Business Management  14 (2016):  1-18.
        Dalilis Escobar Rivera Alexandra Simon Villar Mayra Rosario Moreno Pino  "Towards to the Concept of Risk Approach in the Audit Integrated Management System."  QUALITY access to success  17 (2016):  41-47.
        Dalilis Escobar Rivera; Mayra Rosario Moreno Pino; Luis Cuevas Rodríguez  "La calidad de la auditoría en Sistemas de Gestión. Software audit_integrated."  Ciencias Holguín  22 (2016):  1-17.
        Dalilis Escobar-Rivera1; Anabel Lisbeth Aguilera-Sánchez; Yaima de la Caridad Parra-Pompa  "Propuesta metodológica para la orientación de aplicaciones informáticas hacia BPM y SOA."  Revista Cubana de Ciencias Informáticas  10 (2016):  39-54.
        Giro-Perafita, A., Rabionet, M., Puig, T., Ciurana, J.  "Optimization of Poli(ɛ-caprolactone) scaffolds suitable for 3D cancer cell culture."  Procedia CIRP  49 (2016):  61-66.
        González Carrasco, Mònica; Francés Ortega, Jesús; Castro Vila, Rodolfo de; Castañer Vivas, Margarida; San Molina, Joan; Marti Bonmati, Joan  "The development of professional competences using the interdisciplinary project approach with univessity students."  Journal of Technology and Science Education  6 (2016):  121-134.
        Grabalosa, J.; Ferrer, I.; Elias, A.; Ciurana, J.  "Influence of processing conditions on manufacturing polyamide parts by ultrasonic molding."  Materials and Design Journal  98 (2016):  20-30.
        Iglesias A., Munoa, J., Rodríguez, C., Ciurana, J., Dombovari, Z.  "FRF Estimation through Sweep Milling Force Excitation (SMFE)."  Procedia CIRP  46 (2016):  504-507.
        Jordi Castellano; Albert Ribera; Joaquim Ciurana  "Integrated system approach to evaluate social, environmental and econòmics impacs of buildings for user of housings."  Energy and Buildings   (2016):  106-118.
        Kafel, P.; Casadesús, M.  "The order and level of management standards implementation - changes during the time."  The TQM Journal  28 (2016):  636-647.
        Maudes, J.; Bustillo, A.; Guerra, A.J.; Ciurana, J.  "Random Forest ensemble prediction of stent dimensions in microfabrication processes."  International Journal of Advanced Manufacturing Technology   (2016):  1-15.
        Palomeras, Sònia; Rabionet Díaz, Marc; Ferrer Real, Inés; Sarrats Carbó, Ariadna; Garcia-Romeu, Maria Luisa; Puig i Miquel, Teresa; Ciurana, Quim de  "Breast Cancer Stem Cell Culture and Enrichment Using Poly(ε-Caprolactone) Scaffolds."  Molecules  21 (2016):  537-.
        Ricondo Iriondo, Itziar; Serrano Lasa, Ibon; De Castro Vila, Rodolfo  "Takt time as a lever to introduce lean production in mixed engineer-to-order/make-to-order machine tool manufacturing companies."  International Journal of Industrial Engineering: Theory, Applications and Practice  23 (2016):  94-107.
        Bagudanch, I.; Garcia-Romeu, M.L.; Centeno, G.; Elias-Zúñiga, A.; Ciurana, J.  "Forming force and temperature effects on single point incrementalforming of polyvinylchloride."  Journal of Materials Processing Technology  219 (2015):  221-229.
        Bagudanch, I.; Garcia-Romeu, M.L.; Sabater, M.  "Incremental forming of polymers: Process parameters selection from the perspective of electric energy consumption and cost."  Journal of Cleaner Production  112 (2015):  1013-1024.
        Bagudanch, I.; Lozano-Sánchez, L.M.; Puigpinós, L.; Sabater, M.; Elizalde, L.E.; Elías-Zúñiga, A.; Garcia-Romeu, M.L.  "Manufacturing of polymeric biocompatible cranial geometry by single point incremental forming."  Procedia Engineering  132 (2015):  267-273.
        Castellano, J., Castellano, D., Ribera, A., Ciurana, J.  "Developing a simplified methodology to calculate CO2/m2 emissions per year in the use phase of newly-built, single-family houses."  Energy and Buildings  109 (2015):  90-107.
        Cots, S.; Casadesús, M.  "Exploring the Service Management Standard ISO 20000."  Total Quality Management and Business Excellence  26 (2015):  515-533.
        E. Vázquez; J. Gomar; J. Ciurana; C. Rodríguez  "Evaluation of machine-tool motion accuracy using a CNC machining center in micro-milling processes."  International Journal of Advanced Manufacturing Technology  76 (2015):  219-228.
        Freitas, M.S., Sereno, L., Silveira, Z., Silva, J.V.L., Ciurana J.  "Thermal model for curing implantable silicone in the moulding process applied to tracheal stents."  Applied Thermal Engineering  75 (2015):  1001-1010.
        Laskurain, I.; Heras, I.; Casadesús, M.  "Fostering renewable energy sources by standards for environmental and energy management."  Renewable & Sustainable Energy Reviews  50 (2015):  1148-1156.
        Laskurain, I.; Wulandari, M.; Heras, I.; Casadesús, M.  "¿Resulta rendible la adopción de sistemas de gestión energética? Evidencias de un estudio empírico."  Dyna : ingenieria e indústria  90 (2015):  1-5.
        Monroy, K., Delgado, J., Sereno, L., Ciurana, J., Hendrichs, N. J.  "Geometrical feature analysis of Co-Cr-Mo single tracks after Selective Laser Melting Processing."  Rapid Prototyping Journal  21 (2015):  287-300.
        Monroy, K., Pupo, Y., Sereno, L., Ciurana, J.  "Spectrum Transmission Measurement of a Fiber Laser Beam in Polymethyl Metacrylate for Laser Sintering Processing."  Procedia Engineering  132 (2015):  94-101.
        Negre, P., Grabalosa, J., Ferrer, I., Ciurana, J., Elías-Zúñiga, A., Rivillas F.  "Study of the Ultrasonic Molding Process Parameters for Manufacturing Polypropylene Parts."  Procedia Engineering  132 (2015):  7-14.
        Pentji, L.; Marimon, F.; Casadesús, M.  "The mechanisms through wich certain variables influence customer loyalty: the mediating roles of perceived value and satisfaction."  Human Factors and Ergonomics in Manufacturing and Service Industries  25 (2015):  627-637.
        Pupo, Y.; Monroy, K.; Ciurana, J.  "Influence of process parameters on surface quality of CoCrMo produced by Selective Laser Melting."  International Journal of Advanced Manufacturing Technology  80 (2015):  985-995.
        Simon, A.; Kafel, P.; Nowicky, P.; Casadesús, M.  "The development of complaints handling standards in Spa Companies: A case study analysis."  International Journal for Quality Research  9 (2015):  675-688.
        Teixidor, D; Grzenda, M; Bustillo, A; Ciurana, J.  "Modeling pulsed laser micromachining of micro geometries using machine-learning techniques."  Journal of Intelligent Manufacturing  26 (2015):  801-814.
        Vázquez, E.; Gomar, J.; Ciurana, J.; Rodríguez, C.  "Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V."  Journal of Cleaner Production  87 (2015):  906-913.
        Allur, E. ; Heras, I.; Casadesús, M.  "Internalitation of ISO 9001: A longitudinal survey."  Industrial Management and Data Systems  114 (2014):  872-885.
        Allur, E.; Heras, I.; Casadesús, M.  "¿Que organizaciones interiorizan más los principios de la Gestión de la Calidad Total, las organizaciones del sector servicio o las industriales?."  TMQ - Techniques, Methodologies and Quality  5 (2014):  53-70.
        Ciurana, J.  "Designing, prototyping and manufacturing medical devices: an overview ."  International Journal of Computer Integrated Manufacturing  27 (2014):  901-918.
        Elías-Zúñiga, A.; Baylón, K.; Ferrer, I.; Serenó, L.; García-Romeu, M.L.; Bagudanch, I.; Grabalosa, J.; Pérez-Recio, T.; Martínez-Romero, O.; Ortega-Lara, W.; Elizalde, L.E.  "On the rule of mixtures for predicting stress-softening and residual strain effects in biological tissues and biocompatible materials ."  Materials  7 (2014):  441-456.
        G. Centeno; I. Bagudanch; A.J. Martínez-Donaire; M.L. Garcia-Romeu; C. Vallellano  "Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming."  Materials and Design  63 (2014):  20-29.
        I. Bagudanch; O. Martínez-Romero; A. Elías-Zúñiga; M.L. Garcia-Romeu  "Identifying polymeric constitutive equations for incremental sheet forming modelling."  Procedia Engineering  81 (2014):  2292-2297.
        Iglesias, A., Munoa, J., Ciurana J.  "Optimization of face milling operations with structural chatter using a stability model based process planning methodology ."  International Journal of Advanced Manufacturing Technology  70 (2014):  559-571.
        Jordi Castellano, David Castellano, Albert Ribera, Joaquim Ciurana  "Developement of a scale of building construction system according to CO2 emissions in the use stage of their life cycle."  Building and Environment   (2014):  618-627.
        Kemmoku, D.T.; Sereno, L; San J.; Ciurana, J.   "A novel simplified 3D skull model to predict cranial fracture patterns."  International Journal of Computer Integrated Manufacturing  27 (2014):  927-935.
        Melgoza, E.L., Vallicrosa, G., Sereno, L., Ciurana, J., Rodríguez, C.  "Rapid tooling using 3D printing system for manufacturing of customized tracheal stent."  Rapid Prototyping Journal  20 (2014):  2-12.
        Monroy, K., Delgado, J., Sereno, L., Ciurana, J., Hendrichs, N. J.  "Effects of Selective Laser Melting Manufacturing Process on the Properties of CoCrMo Single Tracks."  Metals and Materials International  20 (2014):  873-884.
        Nowicki, P.; Simon, A.; Kafel, P. ; Casadesús, M.  "Recognition of customers satisfactions standards of ISO 10000 family by spa enterprises - a case study analysis."  TMQ - Techniques, Methodologies and Quality  5 (2014):  91-105.
        O. Martínez-Romero; M.L. Garcia-Romeu; D. Olvera-Trejo; I. Bagudanch; A. Elías-Zúñiga  "Tool dynamics during single point incremental forming process."  Procedia Engineering  81 (2014):  2286-2291.
        Pentji, L.; Marimon, F. ; Casadesús, M.  "The revitalizing role of ISO 9001 on dissatisfied customers."  Total Quality Management and Business Excellence  25 (2014):  856-864.
        Pupo, Y., Sereno, L., Ciurana, J.  "Surface quality analysis in Selective Laser Melting with CoCrMo powders."  Materials Science Forum  797 (2014):  157-162.
        Santos, P., Teixidor, D., Maudes, J., Ciurana, J.  "Modelling laser milling of micro-cavities for the manufacturing of DES with ensembles ."  Journal Of Applied Mathematics   (2014):  -.
        Simon, A.; Pentji, L.; Karapetrovic, S.; Casadesús, M.  "An empirical analysis of the integration of internal and external management systems audits."  Journal of Cleaner Production  66 (2014):  499-506.
        Simon, A.; Pentji, L.; Karapetrovic, S.; Casadesús, M.  "Can integration difficulties affect innovation and satisfaction?."  Industrial Management and Data Systems  114 (2014):  183-202.
        Teixidor, D., Ciurana, J., Rodriguez, C.A.  "Dross formation and process parameters analysis of fiber laser cutting of stainless steel thin sheets."  International Journal of Advanced Manufacturing Technology  71 (2014):  1611-1621.
        Vázquez, E., Amaro, A., Ciurana J., Rodríguez, C.A.  "Process planning considerations for micromilling of mould cavities ."  Precision Engineering-Journal Of The International Societies For Precisionengineering And Nanotechnology  39 (2014):  252-260.
        Vázquez, E., Kenmoku, D., Noritomi, P., Silva, J.V.L., Ciurana J.  "Computer Fluid Dynamics analysis for efficient cooling and lubrication conditions in micromilling of Ti6Al4V."  Materials and Manufacturing Processes  29 (2014):  1494-1501.
        Allur, E.; Heras, I.; Casadesús, M.  "Estudio de la adopción y el abandono de modelos de gestión de la calidad en centros gerontológicos de la CAPV."  ZERBITZUAN  54 (2013):  85-95.
        Bagudanch I.; Centeno G.; Vallellano C.; Garcia-Romeu M.L.;   "Forming force in Single Point Incremental Forming under different bending conditions ."  Procedia Engineering  63 (2013):  354-360.
        Bagudanch I.; Elias-Zúñiga, A. ;Garcia-Romeu M.L.;  "Evaluating material constitutive equations for the simulation of Incremental Sheet Forming applied to form thermoplastic materials ."  Key Engineering Materials  554-557 (2013):  1312-1319.
        Bagudanch I.; Garcia-Romeu M.L.; Ferrer, I. ; Lupiañez, J.  "The effect of process parameters on the energy consumption in Single Point Incremental Forming ."  Procedia Engineering  63 (2013):  346-353.
        Casadesús, M.  "MOOCs: Nou paradigma a la Universitat?."  L'Avenç. Revista catalana d'història  389 (2013):  4-5.
        Centeno G.; Bagudanch I.; Garcia-Romeu M.L.; Martinez-Donaire A.J.; Vallellano C.  "Experimental study on the overall Spifability of AISI 304 sheets under different bending conditions ."  Key Engineering Materials  554-557 (2013):  2293-2298.
        Ciurana, J., Sereno, L., Vallés, E.  "Selecting process parameters in RepRap additive manufacturing system for PLA scaffolds manufacture."  Procedia CIRP  5 (2013):  152-157.
        Ciurana, J.; Hernandez L.; Delgado, J.  "Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material."  International Journal of Advanced Manufacturing Technology  68 (2013):  1103-1110.
        Cots, S. ; Casadesús, M.  "Implementing ISO 20000: proposals from learned lessons."  TMQ - Techniques, Methodologies and Quality   (2013):  12-31.
        Domingos, M., Intranuovo, F., Russo, T., De Santis, R., Gloria, A., Ambrosio, L., Ciurana J., Bartolo, P.  "The first systematic analysis of 3D rapid prototyped poly(ε-caprolactone) scaffolds manufactured through BioCell Printing: the effect of pore size and geometry on compressive mechanical behavior and in vitro hMSC viability."  Biofabrication  5 (2013):  045004-.
        Karla P. Monroy-Vázquez; Aldo Attanasio; Elisabetta Ceretti; Héctor R. Siller; Nicolás J. Hendrichs-Troeglen; Claudio Giardini  "Evaluation of Superficial and Dimensional Quality Features in Metallic Micro-Channels Manufactured by Micro-End-Milling ."  Materials  6 (2013):  1434-1451.
        Karla P. Monroy-Vázquez; Elisabetta Ceretti; Claudio Giardini  "Cutting Force Modeling."  Procedia CIRP   (2013):  -.
        Monroy, K., Delgado, J., Ciurana, J.  "Study of the pore formation on CoCrMo alloys by selective laser melting manufacturing process ."  Procedia CIRP  63 (2013):  361-369.
        Petnji Yaya, L.; Marimon, F; Casadesus, M  "Can ISO 9001 improve service recovery? ."  Industrial Management and Data Systems  113 (2013):  1206-1221.
        Petnji, L.H.; Marimon, F.; Casadesus, M  "The contest determinant of delight and disappointment: a case study of online banking."  Total Quality Management and Business Excellence  24 (2013):  1376-1389.
        Pupo, Y., Delgado, J., Sereno, L., Ciurana, J.   "Scanning space analysis in Selective Laser Melting for CoCrMo powder."  Procedia CIRP  63 (2013):  370-378.
        Sereno, L., Ferrer, I., Soy, F., Salvador, A., Elias-Zuñiga, A., Pérez, T., Ciurana, J.  "Designing and prototyping of new device for Scapholunate ligament repair."  Procedia CIRP  5 (2013):  270-275.
        Simon, A.; Bernardo, M.; Casadesús, M.; Karapetrovic, S.  "Implementing integrated management systems in chemical firms."  Total Quality Management and Business Excellence  24 (2013):  294-309.
        Teixidor, D., Ciurana, J., Rodriguez, C.A.  "Multi-objective optimization of laser milling parameters of micro-cavities for the manufacturing of DES."  Materials and Manufacturing Processes  28 (2013):  1370-1378.
        Teixidor, D., Ferrer, I., Ciurana, J., Ozel, T.  "Optimization of Process Parameters for Pulsed Laser Milling of Micro-channels on AISI H13 Tool Steel."  Robotics and Computer-Integrated Manufacturing  29 (2013):  209-218.
        Teixidor, D., Quintana, G., Ciurana, J.  "Experimental introduction to surface roughness parameters measurement."  Materials Science Forum  759 (2013):  63-71.
        Teixidor, D., Thepsonti, T., Orozco, F., Ciurana, J., Rodríguez, C.A., Ozel, T.  "Effect of Process Parameters in Nanosecond Pulsed Laser Micromachining of PMMA-based Microchannels."  International Journal of Advanced Manufacturing Technology  67 (2013):  1651-1664.
        Bartolo, P. J., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K.P., Mitsuishi, M., Ciurana, J., Leu, M.  "Biomedical production of implants by additive electro-chemical and physical processes."  CIRP Annals - Manufacturing Technology  61 (2012):  635-655.
        Bernardo, M.; Casadesús, M.; Karapetrovic, S.; Heras, I.   "Integration of standardized management systems: Does the implementation order matter? ."  International Journal of Operations & Production Management  32 (2012):  291-307.
        Bernardo, M.; Casadesús, M.; Karapetrovic, S.; Heras. I.   "Do integration difficulties influence management system integration levels? ."  Journal of Cleaner Production  21 (2012):  23-33.
        Bernardo, M.; Valls, J.; Casadesús, M.  "Strategic alliances: an analysis of Catalan hospitals ."  Revista Panamericana de Salud Pública = Pan American Journal of Public Health  31 (2012):  40-47.
        Bernardo, M; Heras, I.; Valls, J.; Casadesús, M.  "Gestión de la calidad y excelencia empresarial: pasado, presente y futuro."  Papeles de Economía Española  132 (2012):  227-238.
        Blanch, R. ; Ferrer, I.; Garcia-Romeu, M.L.; Ciurana, J.  "A model to build manufacturing process chains during embodiment design phases ."  International Journal of Advanced Manufacturing Technology  59 (2012):  421-432.
        Casadesús, M.; Karapetrovic, S.; Heras, I.;  "Augmentation of standardized quality management systems. An empirical view."  International Journal Advanced Quality   (2012):  -.
        Castillo, S.M.; Casadesús, M.; Karapetrovic, S; Coromina, L.; Heras, .I; Martin, I.   "Is Implementing Multiple Management System Standards a Hindrance to Innovation?."  Total Quality Management and Business Excellence  23 (2012):  1075-1088.
        Delgado, J.; Ciurana, J.;   "Mechanical characterization study of metal material properties in additive layer processes."  International Journal of Mechatronics and Manufacturing Systems (IJMMS)  5 (2012):  189-213.
        Delgado, J.; Ciurana, J.; Rodríguez, C.A.  "Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials."  International Journal of Advanced Manufacturing Technology  60 (2012):  601-610.
        Díez-Pastor, J.-F. , Bustillo, A., Quintana, G., García-Osorio, C.  "Boosting Projections to improve surface roughness prediction in high-torque milling operations."  Soft Computing  16 (2012):  1427-1437.
        Elisa Vázquez; Xavier Gómez; Joaquim Ciurana   "An experimental analysis of process parameters to manufacture by milling micro-channels in biomaterials ."  International Journal of Mechatronics and Manufacturing Systems (IJMMS)  5 (2012):  46-65.
        Grzenda, M.; Bustillo, A.; Quintana, G.; Ciurana, J.,   "Improvement of surface roughness models for face milling operations through dimensionality reduction."  International Journal of Computer Integrated Manufacturing  19 (2012):  179-197.
        Heras, I.; Marimon, F.; Casadesus, M.  "An empirical study of the relationships within the categories of the EFQM model ."  Total Quality Management and Business Excellence  23 (2012):  523-540.
        J. Gomar; A. Amaro; E. Vázquez; J. Ciurana; C. Rodriguez  "Experimental analysis of process parameters to manufacture micro-cavities by micromilling."  Advanced Materials Research SPECIAL ISSUE: Advances in Materials Processing Technologies  498 (2012):  91-96.
        Llach, J.; De Castro, R.; Bikfalvi, A.; Marimon, F.  "Relationship between Environmental Management Systems and Organisational Innovations ."  Human Factors and Ergonomics in Manufacturing and Service Industries  22 (2012):  307-316.
        Marimon, F.; Petnji Yaya, L.; & Casadesus Fa, M  "Impact of e-Quality and service recovery on loyalty: A study of e-banking in Spain. ."  Total Quality Management and Business Excellence  23 (2012):  769-787.
        Melgoza, E.L., Sereno, L., Rosell, A., Ciurana, J.  "Integrated parameterized tool for designing customized tracheal stent ."  Computer Aided Design Journal  44 (2012):  1173-1181.
        Perez-Santiago, R.; Bagudanch, I.; Garcia-Romeu, M.; Hendrichs, N.  "Effect of Strain Hardening Exponent in the Incremental Sheet Forming Force. ."  Steel Research International   (2012):  439-442.
        Petnji Yaya, L.; Marimon, F.; Casadesus Fa, M  "Assessing e-service quality: the current state of E-S-QUAL."  Total Quality Management and Business Excellence  23 (2012):  1363-1378.
        Puigpinós, L.; Bagudanch, I.; Garcia-Romeu, M.; Perez-Santiago, R.  "Incremental Sheet Forming (ISF) technology applied to form thin metal sheets. ."  Steel Research International   (2012):  443-446.
        Quintana, G., Bustillo, A., Ciurana, J.  "Prediction, monitoring and control of surface roughness in high-torque milling machine operations."  International Journal of Computer Integrated Manufacturing  25 (2012):  1129-1138.
        Quintana, G; Garcia-Romeu, M.L.; Ciurana J.  "Cutting Tool Selection through Tool Wear, Cost, Power Consumption and Surface Roughness Analyses ."  Advanced Materials Research  498 (2012):  55-60.
        Santi Cots; Martí Casadesús   "Mejorando la gestión de TI: La norma ISO/IEC 20000 ."  Forum calidad: gestión de calidad, metrología y medio ambiente  228 (2012):  32-38.
        Sereno, L.; Delgado, J.; Ciurana, J.  "Customizing Food with an Additive Manufacturing Technology ."  Materials Science Forum  713 (2012):  43-48.
        Simon, A.; Karapetrovic, S.; Casadesús, M.  "Difficulties and Benefits of Integrated Management Systems ."  Industrial Management and Data Systems  112 (2012):  828-846.
        Simon, A.; Karapetrovic, S.; Casadesús, M.  "Evolution of integrated management systems in Spanish firms ."  Journal of Cleaner Production  23 (2012):  8-19.
        Soria, M.; Bagudanch, I.; Garcia-Romeu, M.L.; Perez-Santiago, R.; Masqué, S.; Ribatallada, J.; Guillaumet, J.; Ardanuy, J.; Poch, R.  "Numerical approach of ROBOSTAMP: a new metal forming technology based on the use of industrial robots.."  Steel Research International   (2012):  311-314.
        Teixidor, D.; Ciurana, J.; Thepsonthi, T.; Ozel, T.   "Nanosecond Pulsed Laser Micro-Machining of PMMA-based Microfluidic Channels ."  Journal Of Manufacturing Processes  14 (2012):  435-442.
        Teixidor, D.; Ferrer, I.; Ciurana J.  "Experimental Analysis of Laser Micro-Machining Process Parameters."  Materials Science Forum  713 (2012):  67-73.
        Villar, J.R., Gonzalez, S., Sedano, J., Corchado, E., Puigpinos, L., Ciurana, J.  "Meta-heuristic improvements applied for steel sheet incremental cold shaping."  Memetic Computing  4 (2012):  249-261.
        Alberti, M., Ciurana, J., Rodríguez, C.A., Ozel, T.  "Design of A Decision Support System for Machine Tool Selection Based on Machine Characteristics and Performance Tests."  Journal of Intelligent Manufacturing  22 (2011):  263-277.
        Bagudanch, I.; Pérez-Santiago, R.; García-Romeu, M.L.  "Tool path strategies for single point incremental forming ."  Key Engineering Materials  473 (2011):  905-912.
        Bartolo, P., Domingos, M., Gloria, A., Ciurana, J.   "BioCell Printing: Integrated automated assembly system for tissue engineering”. ."  CIRP Annals - Manufacturing Technology  60 (2011):  271-274.
        Bernardo, M., Casadesus, M., Karapetrovic, S.  "Are methods used to integrate standardized management systems a conditioning factor of the level of integration? An empirical study ."  International Journal for Quality Research  5 (2011):  213-222.
        Bernardo, M.; Casadesús, M.; Karapetrovic, S.; Heras, I.  "Relationships between the integration of audits and management systems: an empirical study ."  The TQM Journal  23 (2011):  659-672.
        Blanch, R., Pellicer, N., G.-Romeu, M.L., Ciurana, J.  "Machining processes time calculating tool integrated in computer aided process planning (CAPP) for small and medium enterprises (SMEs)."  International Journal of Computer Integrated Manufacturing  24 (2011):  40-52.
        Brecher, C; Quintana, G; Rudolf, T; Ciurana, J.  "Use of NC kernel data for surface roughness monitoring in milling operations ."  International Journal of Advanced Manufacturing Technology  53 (2011):  953-962.
        Bustillo, A., Díez-Pastor, J.-F., Quintana, G., García-Osorio, C.   "Avoiding neural network fine tuning by using ensemble learning: Application to ball-end milling operations."  International Journal of Advanced Manufacturing Technology  57 (2011):  521-532.
        Casadesús, M.; Karapetrovic, S.; Heras, I.  "Synergies in Standardized Management Systems: Some empirical evidence ."  The TQM Journal  23 (2011):  73-86.
        Delgado, J.; Ciurana, J.; Serenó, L.  "Comparison of forming manufacturing processes and selective laser melting technology based on the mechanical properties of products."  Virtual and Physical Prototyping  6 (2011):  167-178.
        Heras, I.; Casadesus, M.; Marimon, F.   "Impact of ISO 9001 standard and the EFQM model: The view of the assessors ."  Total Quality Management and Business Excellence  22 (2011):  197-218.
        Heras, I.; Marimon, F.; Casadesús, M.  "Impact of quality improvement tools on the performance of firms using different quality management systems ."  Innovar-Revista de Ciencias Administrativas y Sociales  21 (2011):  161-173.
        Karapetrovic, S.; Casadesús, M.; Heras, I.  "Augmentation of standardized quality management systems: an empirical view."  International Journal of Total Quality Management & Excellence  39 (2011):  1-4.
        Marimon, F.; Pentji, L.H.; Casadesús, M.   "Impact of Service Recovery on Customer Loyalty: A Study of e-Banking in Spain ."  Review of International Comparative Management = Revista de Management Comparat Internacional  12 (2011):  49-60.
        Mir, M.; Casadesús, M.  "Normas para la gestión de la innovación. Un análisis comparativo."  Dyna : ingenieria e indústria  86 (2011):  49-58.
        Mir, M.; Casadesús, M.  "Standardised innovation management systems: a case study of the Spanish Standard UNE 166002:2006 ."  Innovar-Revista de Ciencias Administrativas y Sociales  21 (2011):  171-187.
        Pellicer, N.; Ciurana, J.; Delgado, J.  "Tool electrode geometry and process parameters influence on different feature geometry and surface quality in electrical discharge machining of AISI H13 steel ."  Journal of Intelligent Manufacturing  22 (2011):  575-584.
        Pentji, L.H.; Marimon, F.; Casadesús, M.   "Customer's loyalty and perception of ISO 9001 in online banking ."  Industrial Management and Data Systems  111 (2011):  1194-1213.
        Pérez, R., Ciurana, J., Riba, C., Molina, A., Romero, D., Hernández, L.W., Quesada, A.M.  "Concurrent Conceptual Evaluation of Tolerances´ Synthesis in Mechanical Design."  Concurrent Engineering-Research and Applications  19 (2011):  175-186.
        Pérez-Santiago, R.; Bagudanch, I.; García-Romeu, M.L.  "Force modelling in single point incremental forming of variable wall angle components ."  Key Engineering Materials  473 (2011):  833-840.
        Petnji Yaya L. H., Marimon F., Casadesus M.  "Investigating discrepancies between e-services implementing or not ISO 9001: customer's outlook in the backdrop of e-services in Catalonia (Spain) ."  International Journal for Quality Research  5 (2011):  297-308.
        Quintana, G., Campa, F.X., Ciurana, J., Lopez de Lacalle, L.N.  "Productivity improvement through chatter-free milling in workshops."  Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture  225 (2011):  1163-1174.
        Quintana, G., Ciurana, J.   "Cost estimation support tool for vertical high speed machines based on product characteristics and productivity requirements."  International Journal of Production Economics  134 (2011):  188-195.
        Quintana, G., Ciurana, J.,   "Cost estimation support tool for vertical high speed machines."  International Journal of Production Economics  134 (2011):  188-195.
        Quintana, G., Rudolf, T., Ciurana, J., Brecher, C.,   "Using kernel data in machine tools for the indirect evaluation of surface roughness in vertical milling operations."  Robotics and Computer-Integrated Manufacturing  27 (2011):  1011-1018.
        Quintana, G.; Ciurana, J.  "Chatter in machining processes: a review."  International Journal of Machine Tools and Manufacture  51 (2011):  363-376.
        Quintana, G.; Ciurana, J.; Ribatallada, J.   "Modelling power consumption in ball-end milling operations."  Materials and Manufacturing Processes  26 (2011):  746-756.
        Quintana, G.; Ciurana, J.; Teixidor, D.; Ferrer, I.  "Experimental introduction to forced and self-excited vibrations in milling processes and identification of stability lobes diagrams."  Materials Science Forum  692 (2011):  24-32.
        Quintana, G.; Rudolf, T.; Ciurana, J.; Brecher, C.  "Surface roughness prediction through internal kernel information and external accelerometers using artificial neural networks."  Journal of Mechanical Science And Technology  25 (2011):  2877-2886.
        Simon, A; Bernardo, M; Karapetrovic, S; Casadesus, M.  "Integration of standarized environmental and quality management systems audits ."  Journal of Cleaner Production  19 (2011):  2057-2065.
        Vazquez, E., Ciurana, J., Rodríguez, C.A., Thepsonthi, T., Ozel, T.   "Swarm intelligent selection and optimization of machining system parameters for micro-channel fabrication in medical devices."  Materials and Manufacturing Processes  26 (2011):  403-414.
        Bernardo, M.; Casadesus, M.; Karapetrovic, S.; Heras, I.  "An empirical study of the integration of management system audits ."  Journal of Cleaner Production  18 (2010):  486-495.
        Casadesús, M; Marimon, F.; Alonso, M.   "The future of standardised quality management in tourism: Evidence from the Spanish tourist sector ."  Service Industries Journal  30 (2010):  2457-2474.
        Ferrer, I.; Rios, J.; Ciurana, J.; Garcia-Romeu, M.L.  "Methodology for capturing and formalizing DFM Knowledge ."  Robotics and Computer-Integrated Manufacturing  26 (2010):  420-429.
        G.-Romeu, M.L.; Mayugo, J.A.; Ciurana, J.  "Determining Curvature of Air Bent Parts by Digital Image Processing ."  International Journal of Material Forming,   3 (2010):  105-108.
        Garcia-Romeu, M.L., Mayugo, J., Ciurana, J.  "Determining curvature of air bended parts by digital image processing."  Proceedings of ESAFORM 2010 the 13th international conference on Manterial Forming  1 (2010):  11-.
        Karapetrovic, S.; Casadesús, M.; Heras, I.   "Empirical analysis of integration whithin the Standards-Based integrated management systems ."  International Journal for Quality Research  4 (2010):  25-35.
        Karapetrovic, S.; Casadesus, M.; Heras, I.   "What happened to the ISO 9000 lustre? An eight-year study ."  Total Quality Management and Business Excellence  21 (2010):  245-267.
        Llach Pagès, J., Bikfalvi, A., de Castro Vila, R.  "The use and impact of technology in factory environments: evidence from a survey of manufacturing industry in Spain ."  International Journal of Advanced Manufacturing Technology  47 (2010):  181-190.
        Llach, J.; Casadesus, M.; Marimon, F.  "Relationship between Quality Management Systems and organisational innovations ."  Human Factors and Ergonomics in Manufacturing and Service Industries  21 (2010):  52-66.
        Marimon, F.; Casadesus, M.; Heras, I.  "Certification intensity level of the leading nations in ISO 9000 and ISO 14000 standards ."  International Journal of Quality and Reliability Management  27 (2010):  1002-1020.
        Míguez, S., Vallicrosa, G., Ciurana, J.,   "Modelling manufacturing processes, a comparison between multiple regression analysis and the neural networks approach."  International Journal of Mechatronics and Manufacturing Systems (IJMMS)  3 (2010):  405-424.
        Pérez, C.; De Castro, R.; Simons, D.; Giménez Leal, G.  "Development of lean supply chains: a case study of the Catalan pork sector ."  Supply Chain Management-An International Journal  15 (2010):  55-68.
        Providência, B., Ciurana J.   "Interface tool for human communication to integrate psychophysics inputs with rapid manufacturing technologies."  International Journal of Computer Integrated Manufacturing  23 (2010):  777-790.
        Quintana, G., Ciurana, J., Ribatallada, J.  "Surface Roughness Generation and Material Removal Rate in Ball End Milling Operations ."  Materials and Manufacturing Processes  25 (2010):  389-398.
        Quintana, G., Gomez, X., Delgado, J., Ciurana, J.,   "Influence of cutting parameters on cycle time, surface roughness, dimensional error and cutting forces in milling operations on aluminium 6082 sculptured surface geometry."  International Journal of Machining and Machinability of Materials  8 (2010):  339-355.
        Quintana, G.; Cavallini, B.; Ardany, X., Vázquez, E.; Lamikiz, A.; Campa, F.; Urreta, H.; Gandarias, E.; Olvera, D.; Barreiro, J.; Rodríguez, P.  "Mercados: Microproducción ."  IMHE   (2010):  27-46.
        Quintana, G.; Ciurana J.; Teixidor, D.; Ferrer, I.   "Introducción experimental a las vibraciones forzadas y auto-excitadas en procesos de fresado e identificación del diagrama de estabilidad."  Proceedings CUIEET XVIII Congreso univesitario de innovación en las enseñanzas técnicas  1 (2010):  1-12.
        Rodríguez, C.A.; Siller, H.R.; Garcia-Romeu, M.L.  "Neural network modelling of process parameters influence on tool wear for ball-nose end mills."  International Journal of Mechatronics and Manufacturing Systems (IJMMS)  3 (2010):  393-404.
        Sabater, M.; Garcia-Romeu, M.L.;  "Contrasting models to determine the approximate extrusion conditions for the first billet ."  Key Engineering Materials  424 (2010):  249-256.
        Tauler, F.; Teixidor, D.; Ferrer, I.  "Herramientas prácticas para mejorar la calidad de los productos.."  IMHE   (2010):  -.
        Vazquez, E.; Rodríguez, C.A.; Elias-Zuñiga; A., Ciurana, J.  "An Experimental analysis of process parameters to manufacture metallic micro-channels by micro-milling."  International Journal of Advanced Manufacturing Technology  51 (2010):  945-955.
        Vàzquez, E.; Teixidor, D.; Ciurana J.,   "Evaluación de tecnologías de fabricación para la producción de micro-canales."  Proceedings 18 INVEMA Congreso de Máquinas Herramientas y Tecnologías de Fabricación  1 (2010):  69-.
        Heras, I.;Marimon, F.; Casadesús, M  "Impacto competitivo de las herramientas para la gestión de la calidad ."  Cuadernos de Economia y Direccion de la Empresa   (2009):  7-35.
        Bernardo, M.; Casadesus, M.; Heras, I.   "Auditorías integradas de los sistemas de gestión: un estudio empírico = Management systems integrated audits: an empirical study ."  Dirección y organización: revista de dirección, organización y administración de empresas   (2009):  37-44.
        Bernardo, M.; Casadesus, M.; Karapetrovic, S.; Heras, I.  "How integrated are environmental, quality and other standardized management systems? An empirical study ."  Journal of Cleaner Production  17 (2009):  742-750.
        Bernardo, M.; Karapetrovic, S.; Heras, I.; Casadesus, M.  "Auditorías de sistemas de gestión: evidencias empíricas ."  Forum calidad: gestión de calidad, metrología y medio ambiente   (2009):  35-38.
        Casadesus, M.; Heras, I.; Karapetrovic, S.  "Sistemas de gestión estandarizados. ¿Existen sinergias? ."  Revista Europea de Dirección y Economía de la Empresa  18 (2009):  161-174.
        Ciurana, J.; Arias, G.; Ozel, T.  "Neural network modelling the influence of process parameters on feature geometry and surface Quality on pulsed laser micro machining of hardened stell H13."  Materials and Manufacturing Processes   (2009):  -.
        Ciurana, J.; Lopez de Lacalle, L.N.; Girot, F.   "Nuevas aplicaciones, nuevas oportunidades para la fabricación."  IMHE   (2009):  -.
        Ferrer, I.; Ríos, J.; Ciurana, J.  "An approach to integrate manufacturing process information in part design phases ."  Journal of Materials Processing Technology  209 (2009):  2085-2091.
        Karapetrovic, S.; Casadesus, M.  "Implementing environmental with other standardized management systems: Scope, sequence, time and integration ."  Journal of Cleaner Production  17 (2009):  533-540.
        Lopez de Lacalle, L.N.; Arrazola, P.J.; Marcos, M.; Ciurana, J.   "Mercados de hoy y de mañana."  IMHE   (2009):  -.
        Marimon, F.; Heras, I.; Casadesus, M.  "ISO 9000 and ISO 14000 standards: A projection model for the decline phase ."  Total Quality Management and Business Excellence  20 (2009):  1-21.
        Mungía, J.; Ciurana, J.; Riba, C.   "A Neural Network-based model for build time estimation in selective laser sintering."  Journal of Engineering Manufacture: Part B   (2009):  -.
        Pellicer, N., Ciurana, J., Özel, T.   "Influence of process parameters and electrode geometry in EDM micro-machining of hardened steel."  Materials and Manufacturing Processes  24 (2009):  1282-1289.
        Pérez, C.; De Castro, R.; Font-Furnols, M.  "The Pork Industry: a supply chain perspective."  British Food Journal  111 (2009):  257-274.
        Quintana, G.; Ciurana, J.; Ferrer, I.; Rodríguez, C.A.  "Sound mapping for identification of stability lobe diagrams in milling processes ."  International Journal of Machine Tools and Manufacture  49 (2009):  203-211.
        Quintana, G.; Garcia-Romeu, M.L.; Ciurana, J.  "Surface roughness monitoring application based on artificial neural networks for ball-end milling operations."  Journal of Intelligent Manufacturing  22 (2009):  607-617.
        Bernardo, M.; De Castro, R.; Valls, J.  "Freight Oportunities in the High Speed Train Arrival: Catalonian experience."  Review of International Comparative Management = Revista de Management Comparat Internacional  9 (2008):  44-57.
        Bernardo, M.; Karapetrovic, S.; Heras, I.; Casadesús, M.  "Sistemas integrados de gestión: ¿Cómo se integran los estándares de gestión en las empresas españolas?."  Forum calidad: gestión de calidad, metrología y medio ambiente  191 (2008):  30-35.
        Casadesus, M.; Marimon, F.; Heras, I.  "ISO 14001 diffusion after the success of the ISO 9001 model ."  Journal of Cleaner Production  16 (2008):  1741-1754.
        Castillo, S.M.; Casadesus, M.; Karapetrovic, S.; Heras, I. ; Martín, I.   "Do standardized management systems hinder innovation processes? ."  International Journal for Quality Research  2 (2008):  121-127.
        Ciurana, J.; Garcia-Romeu, M.L.; Ferrer, I.; Casadesus, M.  "A model for integrating process planning and production planning and control in machining processes ."  Robotics and Computer-Integrated Manufacturing  24 (2008):  532-544.
        Ciurana, J.; Quintana, G.; Garcia-Romeu, M.L.  "Estimating the cost of vertical high speed machining centres, a comparison between multiple regression analysis and neural networks approach ."  International Journal of Production and Economics  115 (2008):  171-178.
        Dick Gavin P.M.; Heras, I.; Casadesús, M.  "Shedding light on causation between ISO 9001 and improved business performance ."  International Journal of Operations & Production Management  28 (2008):  687-708.
        Ferrer, I.; Ciurana, J.; Sánchez, J.A.; Ortega, N.  "Diseñar para fabricar: recetas para el éxito ."  IMHE   (2008):  35-49.
        Marimon, F.; Heras, I.; Casadesus, M.  "The Uncertainties of Environment’s Parameters Measurements as Tools of the Measurements Quality Improvement."  International Journal for Quality Research  2 (2008):  135-143.
        Mir, M.; Casadesus, M.  "UNE 166002:2006: Estandarizar y sistematizar la I+D+I. La norma y la importancia de las TIC en su implementación."  Dyna : ingenieria e indústria  83 (2008):  61-62.
        Mungía, J.; Ciurana, J.; Riba, C.   "Pursuing successful rapid manufacturing: A users' best-practices approach ."  Journal of Rapid Prototyping  14 (2008):  173-179.
        Quintana, G.; Ciurana, J.; Garcia-Romeu, M.L.  "Decision support tool for blank selection in workshop machining processes ."  Engineering Computations  25 (2008):  140-154.
        Quintana, G.; Ciurana, J.; Garcia-Romeu, M.L.  "Design of an application to assist in the decision about the blank in machining processes."  Engineering Computations   (2008):  -.
        Quintana, G.; Ciurana, J.; Teixidor, D.  "A new experimental methodology for identification of stability lobes diagram in milling operations ."  International Journal of Machine Tools and Manufacture  48 (2008):  1637-1645.
        Quintana, G.; Gómez, X.; Delgado, J.; Teixidor, D.  "Una Ayuda para la selección de estrategias ."  IMHE   (2008):  51-61.
        Riba, C.; Perez, R.; Hernandez, L.W.; Ciurana, J.   "A framework for tolerance analysis in collaborative engineering mechanical design ."  Lecture Notes in Computer Science   (2008):  58-65.
        Sabater, M.; Garcia-Romeu, M.L.; Ciurana, J.  "Input parameters determination for predicting ram speed and billet temperature for the first billet
        ."  Key Engineering Materials  367 (2008):  161-168.
        Serrano, I.; Ochoa, C.; De Castro, R.  "An evaluation of the value stream mapping tool ."  Business Process Management Journal  14 (2008):  39-52.
        Serrano, I.; Ochoa, C.; De Castro, R.  "Evaluation of value stream mapping in manufacturing systems redesigning ."  International Journal of Production Research  46 (2008):  4409-4430.
        Heras, I.; Casadesús, M.  "ISO 9000: 1987-2007. Veinte años del primer estándar global de gestión

        ."
         Forum calidad: gestión de calidad, metrología y medio ambiente  182 (2007):  142-145.
        Albertí, M.; Ciurana, J.; Rodríguez, C.A.  "Experimental analysis of dimensional error vs. cycle time in high speed milling of aluminium alloy ."  International Journal of Machine Tools and Manufacture  47 (2007):  236-246.
        Ciurana, J.; López, L.N.   "El Fresado en 5 ejes: máquinas, procesos y formación ."  IMHE   (2007):  75-80.
        Flores, V.; Ortega, C.; Albertí, M.; Rodriguez, C.A.; Ciurana, J.; Elías, A.  "Evaluation and modeling of productivity and dynamic capability performance machining centers ."  International Journal of Advanced Manufacturing Technology  33 (2007):  403-411.
        Garcia-Romeu, M.L.; Ciurana, J.; Ferrer, I.   "Springback determination of sheet metals in an air bending process based on an experimental work ."  Journal of Materials Processing Technology  191 (2007):  174-177.
        Heras, I.; Bernardo, M.; Casadesus, M.  "La Integración de sistemas de gestión basados en estándares internacionales: resultados de un estudio empírico realizado en la CAPV."  Revista de dirección y administración de empresas  14 (2007):  155-174.
        Casadesus, M.; Heras, I.; Karapetrovic, S.  "Las normas de soporte ISO 1000: ¿un nuevo paradigma en la normalización? ."  Forum calidad: gestión de calidad, metrología y medio ambiente  177 (2006):  22-27.
        Casadesus, M.; Karapetrovic, S.; Heras, I.  "Beneficios y costes de la implantación de la normativa de calidad ISO 9000: Estudio empírico comparativo (1998-2002) ."  Revista de economía y empresa  21 (2006):  57-74.
        Ciurana, J.; Ferrer, I.; Gao, J.X.   "Activity model and computer aided system for defining sheet metal process planning ."  Journal of Materials Processing Technology  173 (2006):  213-222.
        Garcia-Romeu, M.L.; Ciurana, J.  "Modelo de predicción del ángulo de recuperación y del radio de doblado final en el proceso de doblado al aire de chapa ."  Deformación metálica  290 (2006):  60-69.
        Garcia-Romeu, M.L.; Ciurana, J.  "Springback and Geometry Prediction Neural Network applied to the air bending process ."  Lecture Notes in Computer Science  4113 (2006):  470-475.
        Heras, I.; Arana, G.; Casadesús, M.  "A Delphi study on motivation for ISO 9000 and EFQM ."  International Journal of Quality and Reliability Management  23 (2006):  807-827.
        Heras, I.; Arana, G.; Casadesus, M.  "The Impact of quality management in European companies' performance: the case of the Spanish companies ."  European Business Review  18 (2006):  114-131.
        Heras, I.; Casadesus, M.   "Los Estándares internacionales de sistemas de gestión: pasado, presente y futuro."  Boletín ICE económico   (2006):  45-61.
        Marimon, F.; Casadesus, M.  "La ISO 9000: ¿Seguirá siendo válida en la nueva era de la gestión de la caldiad? ."  Dyna : ingenieria e indústria  81 (2006):  11-14.
        Marimon, F.; Casadesus, M.; Heras, I.  "ISO 9000 and ISO 14000 standards: An international diffusion model ."  International Journal of Operations & Production Management  26 (2006):  141-165.
        Marimon, F.; Casadesus, M.; Heras, I.  "La Consultoría en España: ¿Consulta o inculcación de principios? ."  Universia business review: revista trimestral de dirección de empresas  9 (2006):  74-87.
        Méndez Rodríguez, E.; Casadesus, M..; Ciurana, J.  "GIRONACEL: A virtual tool for learning quality management."  Innovations in Education and Teaching International  43 (2006):  313-324.
        Perez, R.; Ciurana, J.; Riba, C.  "The characterization and specification of functional requirements and geometrical tolerances in design ."  Journal of Engineering Design  17 (2006):  311-324.
        Serrano, I. ; Laca A. ; De Castro R.  "The path to lean success."  IET Manufacturing Engineer  85 (2006):  26-29.
        Albertí, M.; Ciurana, J.; Casadesús, M.  "A System for optimising cutting parameters when planning milling operations in high speed machining ."  Journal of Materials Processing Technology  168 (2005):  25-35.
        Andonegui, J.; Casadesus, M.; Zamanillo, I.  "Evolución histórica de los sistemas ERP: De la gestión de materiales a la empresa digital."  Revista de dirección y administración de empresas   (2005):  61-72.
        Casadesus, M.; Albertí, M.; Méndez Rodríguez, E.  "Gironacel: a virtual learning experience for improving quality ."  The TQM magazine  17 (2005):  546-557.
        Casadesús, M.; De Castro, R.   "How improving quality improves supply chain management: empirical study ."  Total Quality Management  17 (2005):  345-357.
        Casadesus, M.; De Castro, R.  "How improving quality imrpoves supply chain management: empirical study ."  The TQM magazine  17 (2005):  345-357.
        Casadesus, M.; Heras, I.  "El Boom de la calidad en las empresas españolas ."  Universia business review: revista trimestral de dirección de empresas   (2005):  90-101.
        Casadesús, M.; Karapetrovic, S.  "An empirical study of the benefits and costs of ISO 9001:2000 compared to ISO 9001/2/3:1994."  Total Quality Management and Business Excellence  16 (2005):  105-120.
        Casadesus, M.; Karapetrovic, S.   "Has ISO 9000 lost some of its lustre? A longitudinal impact study ."  International Journal of Operations & Production Management  25 (2005):  580-596.
        Casadesus, M.; Karapetrovic, S.  "The Erosion of ISO 9000 benefits: a temporal study ."  International Journal of Quality and Reliability Management  22 (2005):  120-136.
        Heras, I.; Arana, G.; Casadesus, M.   "Resultados de la implantación de la norma ISO 9000 y el modelo EFQM. Conclusiones de un estudio Delphi ."  Forum calidad: gestión de calidad, metrología y medio ambiente   (2005):  32-40.
        Marimon, F.; Casadesus, M.; Heras, I.  "Análisis y un modelo de la difusión internacional de las normas ISO 9000 e ISO 14000 ."  Revista Europea de Dirección y Economía de la Empresa  14 (2005):  81-100.
        Rodríguez, C.A.; Ciurana, J.; Elías, A.   "Industry and university cooperation to enhance manufacturing education ."  Journal of Manufacturing Systems  24 (2005):  277-287.
        Vidal, A.; Albertí, M.; Ciurana, J.; Casadesús, M.  "A decission suport system for optimising the selection of parameters when planning milling operations ."  International Journal of Machine Tools and Manufacture  45 (2005):  201-210.
        Casadesús, M.; Karapetrovic, S.; Heras, I.  "Beneficios y costes de la implantación de la normativa de calidad ISO 9000: Un estudio comparativo (1998-2002)

        ."  Revista de economía y empresa  21 (2004):  57-74.
        Aca, J.; Molina, A.; Ferrer, I.; Albertí, M.  "Reference model for new product, process and facility development: two cases of study."  Lecture Notes in Computer Science  3190/2004 (2004):  69-78.
        Casadesus, M.; Heras, I.; Méndez Rodríguez, E.; Muñoz, P.; Núñez, M. Dolors  "Gironmacel@: Un proyecto web para la formación en ISO 9000 ."  Forum calidad: gestión de calidad, metrología y medio ambiente  156 (2004):  31-36.
        Ciurana, J.; Riba, R.; García-Romeu, M.L.  "Computer application to aid the unidirectional functional dimensioning and tolerancing synthesis ."  Engineering Computations  21 (2004):  455-469.
        García-Romeu, M.L.; Ciurana, J.  "Design and manufacturing assistance tool for drawing sheet metal parts."  Lecture Notes in Computer Science  3190 (2004):  123-132.
        Heras, I,; Casadesús, M.; Marimon, F.  "Incidencia de la certificaciópn ISO 9000 en el rendimiento económico empresarial."  Cuadernos de Economia y Direccion de la Empresa  18 (2004):  173-190.
        Marimon, F.; Casadesús, M.; Heras, I.  "¿Ofrecen calidad las consultorías de calidad? ."  Investigaciones europeas de dirección y economía de la empresa  10 (2004):  189-208.
        Marimon, F.; Casadesús, M.; Heras, I.; Roca, X.; Casals, M.; Forcada, N.; Ferrari, E.  "Percepción de los servicios ofrecidos por las empresas de consultoría de calidad: ¿Resulta efectivo el asesoramiento relacionado con la calidad?."  Cuadernos de Economia y Direccion de la Empresa  19 (2004):  5-31.
        Ciurana, J.; Garcia-Romeu, M.L.; De Castro, R.  "Optimising process planning using groups of precedence between operations based on machined volumes ."  Engineering Computations  20 (2003):  67-82.
        Ciurana, J.; Garcia-Romeu, M.L.; De Castro, R.; Albertí, M.   "A system based on machined volumes to reduce the number of route sheets in process planning ."  Computers in Industry  51 (2003):  41-50.
        Ciurana, J.; Riba, C.; Garcia-Romeu, M.L.  "Implementation of unidirectional functional dimensioning and tolerancing in CAD systems ."  Integrated Manufacturing Systems  14 (2003):  468-476.
        Giménez Leal, G.; Casadesus, M.; Valls, J.  "Using EMS to increase firm’s competitiveness ."  Corporate Social Responsibility And Environmental Management  10 (2003):  101-110.
        Heras, Iñaki; Arana, German; Casadesús, Martí   "Evolución y resultados de la gestión de la calidad en las empresas de la Comunidad Autónoma del País Vasco ."  Ekonomiaz: revista vasca de economía, medio ambiente y recursos naturales  54 (2003):  180-205.
        Marimon, F.; Casadesus, M.; Heras, I.  "The quality of the quality consultants: an empirical study."  Quality Management Journal  10 (2003):  20-31.
        Albertí, M.; Casadesús, M.; Heras, I.  "¿Qué beneficios y costes asociados podemos esperar de la nueva ISO 9000:2000? ."  Forum calidad: gestión de calidad, metrología y medio ambiente  137 (2002):  29-34.
        Casadesús, M.; Marimon, F.; Heras, I.  "Quality service of ISO 9000 consultants ."  International Journal of Quality and Reliability Management  19 (2002):  998-1013.
        Giménez Leal, G.  "Resum: La secuencia de toma de decisiones en la planificación de procesos asistida por computador."  Per Determinar   (2002):  31-31.
        Giménez Leal, G.; Chamorro, A.; Heras, I.  "El futuro de la calidad ambiental en la empresa ."  Forum calidad: gestión de calidad, metrología y medio ambiente   (2002):  36-41.
        Giménez Leal, G.; Valls, J.; Ferrer, I.  "The Spanish chemical industry experience with ISO 14001 and EMAS implementation."  ERP Environment  1 (2002):  65-73.
        Gimenez, G.; Casadesús, M.; Valls, J.  "Gestión ambiental y competitividad: situación actual en la industria española ."  ESIC market: revista internacional de economía y empresa  112 (2002):  211-224.
        Heras, I.; Arana, G.; Casadesús, M.  "Implantación de la normativa ISO 9000: conclusiones de dos estudios empíricos."  Kalithez: boletín de calidad  15 (2002):  3-11.
        Heras, I.; Casadesús, M.; Gavin, D.  "ISO 9000 certification and the bottom line: a comparative study of the profiability of Basque region companies ."  Managerial Auditing Journal  17 (2002):  72-78.
        Heras, I.; Gavin, D.; Casadesús, M.  "ISO 9000 registration's impact on sales and profitability: a longitudinal analysis of performance before and after accreditation ."  International Journal of Quality and Reliability Management  19 (2002):  774-791.
        Marimon, F.; Casadesús, M.; Heras, I.  "Do quality consultants offer a quality service? ."  Total Quality Management  13 (2002):  797-811.
        Marimon, F.; Casadesus, M.; Heras, I.  "The quality of quality consultants: an empirical study ."  Change management : proceedings of the 7th International Conference on ISO 9000 & TQM (7-ICIT)  1 (2002):  927-934.
        Casadesús, M.; Giménez Leal, G.  "Los Beneficios de la implantación de la normativa ISO 9000: Estudio empírico en 288 empresas de Cataluña ."  Cuadernos de Economia y Direccion de la Empresa   (2001):  285-301.
        Casadesus, M.; Giménez Leal, G.; Heras, I.  "Benefits of ISO 9000 implementation in Spanish industry ."  European Business Review  13 (2001):  327-35.
        Casadesus, M.; Heras, I.  "La Norma ISO 9000: beneficios de su introducción en las empresas españolas. Un estudio empírico ."  Revista Europea de Dirección y Economía de la Empresa  10 (2001):  55-67.
        Marimon, F.; Casadesus, M.; Heras, I.  "La Calidad de las consultorías ."  Forum calidad: gestión de calidad, metrología y medio ambiente  122 (2001):  38-42.
        Casadesus, M.; Giménez Leal, G.  "The Benefits of the implementation of the ISO 9000 standard: empirical research in 288 Spanish companies ."  The TQM magazine  12 (2000):  432-441.
        Casadesús, M.; Giménez, G.; Sansaloni, J.  "Aplicación e impacto de la norma ISO9000 en Cataluña ."  Revist@ d'Indústria, Comerç i Turisme  14 (2000):  -.
        Casadesus, M.; Heras, I.; Ochoa, C.  "Implantación de la normativa ISO 9000 en las comunidades autónomas de Cataluña y el País Vasco: Conclusiones de dos estudios empíricos."  Revista de dirección y administración de empresas   (2000):  43-60.
        Ciurana, J.; Cabarrocas, J.; Mayugo, J.A.; Geuns, B.  "Definición de interficies para la coordinación de proyectos de diseño y fabricación mecánico-electrónico. Aplicación práctica."  Revista internacional de información tecnológica  11 (2000):  185-192.
        Ciurana, J.; Riba, R.   "Desarrollo de un algoritmo para la implementación de acotación funcional unidireccional en sistemas CAD."  Revista Iberoamericana de Ingeniería Mecánica  4 (2000):  41-52.
        De Castro, R.; Puigvert, X.; Soler, J.; Tibau, J.  "Economic modelisation of fattening stage to make comparisons between different pig meat markets."  International Symposium on Pig Herd Management Modelling   (2000):  20-32.
        Heras, I.; Ochoa, C.; Casadesus, M.   "Incidencia de la certificación ISO 9000 en función de los bienes producidos por las empresas."  Estudios empresariales   (2000):  12-16.
        Martin, I.; Casadesus, M.  "Las TIC como factor determinante del aprendizaje organizativo. El caso de una empresa suministradora en el sector del automóvil ."  Economía industrial  326 (2000):  73-84.
        Casadesus, M.; Heras,I.  "ISO 9000: Obstáculos y beneficios. Expectativas que se derivan de un estudio empírico reciente en 500 empresas españolas ."  Forum calidad: gestión de calidad, metrología y medio ambiente  105 (1999):  42-47.
        Martí, R., De Castro, R.  "Caso : De SAFA a Nylstar. La Gestión de la calidad total cambia las relaciones internas y permite la reflotación de un empresa con dificultades de supervivencia."  Revista de economía y empresa  XII (2a epoca) (1998):  117-130.

         

        Article de divulgació
        Aníbal Reñones, Andrés Bustillo, Guillem Quintana, Sergio Saludes   "¿Qué pueden hacer los sensores inteligentes en una planta de fabricación?."  Interempresas Energías Renovables   (2012):  -.
        G. Quintana, B. Cavallini, F. Esteve, C. Becker, M. Hermes, A.E. Tekkaya  "El proceso de conformado incremental de tubos."  IMHE  1 (2011):  50-54.
        Teixidor, D.; Vázquez, E.; Ciurana, J.; Quintana, G.  "Planificando un proceso de fresado."  IMHE   (2011):  61-69.
        Lamikiz, A.; Zabaleta, O.; Aristimuño, P.; Aperribay, J.; Arrázola, P.; Garitaonandia, P.; Teixidor, D.; Quintana, G.  "Palabra expertos: Centrados en el fresado ."  IMHE   (2009):  35-57.

         

        Article pendent de publicació
        Castelló Dalmau, Jordi ; Llach Pagès, Josep ; Castro Vila, Rodolfo de  "Evidence for quality management systems being instrumental in improving supplier performance: the case of the wind power sector."  International Journal of Productivity and Quality Management   (2017):  -.
        Pentji-Yaya, L.; Marimon, F.; Llach, J.; Casadesus, M.; Bernardo, M.  "Analysis of training programs related to Quality Management System: the Spanish case."  International Journal of Quality and Reliability Management   (2016):  -.
        Becker, C., Quintana, G., Hermes, M., Cavallini, B., Tekkaya, A.E.  "Prediction of surface roughness due to spinning in the incremental tube forming process."  Production Engineering   (2012):  1-14.
        Rodríguez Gordillo, José; Sáez Pérez, Mª Paz, Durán Suárez, Jorge; Ribera Roget, Albert  "Experimental Evaluation of chromatic behaviour of inorganic pigments in diverse pictorial media. Interest for restoration."  Coloration Technology   (2010):  -.

         

        Proceeding
        Dalilis Escobar Rivera; Alexandra Simon Villar  "Maturity and integration in management systems. Organizational sustainability."  International Journal of Quality and Reliability Management   (2016):  -.
        Karla Monroy; Jordi Delgado; Joaquim Ciurana  "Study of the pore formation on CoCrMo alloys by selective laser melting manufacturing process ."  Procedia Engineering  63 (2013):  361-369.
        Bassach, P., Quintana, G., Ferrer, I., Ciurana, J.   "Studying the relation between corrosion and surface roughness."  AIP Conference Proceedings  1431 (2012):  319-327.
        Bosch, E. ; Quintana, G.; Garcia-Romeu, M.L.; Ciurana, J   "Comparing low cost low quality cutting tools vs. high cost high quality tools for cutting tool selection."  AIP Conference Proceedings   (2012):  -.
        Daniel Teixidor, Guillem Quintana, Joaquim de Ciurana   "Introducción experimental a los parámetros de medida de rugosidad superficial."  Proceedings CUIEET XVIII Congreso univesitario de innovación en las enseñanzas técnicas   (2012):  -.
        Grabalosa, J.; Quintana, G.; Garcia-Romeu, M.L.; Ciurana, J.  "Study of the influence of lubrication on surface roughness in milling operations."  AIP Conference Proceedings  1431 (2012):  502-509.
        Miguez, S.; Pellicer, N.; Ciurana J.   "Análisis del proceso de rectificado basado en la energía específica de corte y el consumo eléctrico."  Proceedings MESIC 2009 III Manufacturing Engineering Society Internacional Conference    (2009):  -.
        Özel, T.; Yildiz, S.; Ciurana J.  "Influence of Material Models on Serrated Chip Formation in Simulation of Machining Ti-6Al-4V Titanium Alloy."  12th CIRP Conference on Modeling of Machining Operations   (2009):  -.
        Quintana, G.; Ribatallada, J.; Ciurana, J.  "Surface Roughness Monitoring Application Based on Artificial Neural Networks."  12th CIRP Conference on Modeling of Machining Operations   (2009):  -.
        Quintana, G.; Teixidor, D.; Gomez, X.; Ciurana J.   "Estudio del efecto de las vibraciones sobre la calidad de las piezas en el proceso de fresado de acero AISI H13."  Proceedings MESIC 2009 III Manufacturing Engineering Society Internacional Conference    (2009):  -.
        Vallicrosa, G.; Tauler, F.; Ciurana J.   "Estudio de viabilidad de fabricación de herramientas esbeltas para EDM por proceso de torneado."  Proceedings MESIC 2009 III Manufacturing Engineering Society Internacional Conference    (2009):  -.
        Blanch, R.; Ferrer, I.; Garcia-Romeu M.L.; Ciurana J.   "An approach system to build the process chain derivation in lenses production system."  Proceedings DET 2008 5th Internationa   (2008):  -.
        Blanch, R.; Pellicer, N.; Garcia-Romeu M.L.; Ciurana J.   "Designing a decision support tool to aid process planning in machining processes for small and medium enterprises."  Proceedings DET 2008 5th Internationa   (2008):  -.
        Ciurana, J.; Casellas, R.; Valls, J.; Juando, J.  "Experiencias en el diseño y desarrollo de competencias de un programa de máster en innovación."  Proceedings XVI Congreso universitario de innovación educativa de las enseñanzas técnicas   (2008):  -.
        Pérez, A.; Garcia-Romeu, M.L.; Blanch, R.; Ciurana, J.  "Diseño e implementación de una herramienta web de casos reales para el autoaprendizaje."  Proceedings XVI Congreso universitario de innovación educativa de las enseñanzas técnicas   (2008):  -.
        Arias, G.; Ciurana, J.; Planta, X.; Crehuet, A.  "Aplicación del Método Taguchi para el análisis del proceso de mecanizado láser de acero endurecido."  Proceedings MESIC 2007 II Manufacturing Engineering Society Internacional Conference  1 (2007):  -.
        Blanch, R.; Pellicer, N.; Garcia-Romeu M.L.; Ciurana, J.; Reig, M.  "Comparison between a designed computer aided process planning (CAPP) system and a computer aided manufacturing (CAM) system for small and medium enterprises (SME's)."  Proceedings DET 2007 4th International conference on Digital Enterprise Technology  1 (2007):  742-750.
        Ciurana, J.; Rodríguez, C.A.; Martinez, E.; Santaularia, M.  "Análisis del ciclo de tiempo y dimensiones de un perfil MECOF en una máquina de alta velocidad."  Proceedings MESIC 2007 II Manufacturing Engineering Society Internacional Conference   (2007):  -.
        Ferrer, I.; Rios, J.; Ciurana, J.  "Metodología para identificar y formalizar la información relevante en el diseño para fabricación."  Proceedings MESIC 2007 II Manufacturing Engineering Society Internacional Conference  1 (2007):  -.
        Garcia-Romeu M.L.; Ciurana, J.; Frigola, S.; Teixidor, D.   "Selección de parámetros en la estrategia usada por un sistema CAM para obtener óptimos acabados."  Proceedings MESIC 2007 II Manufacturing Engineering Society Internacional Conference  1 (2007):  -.
        Quintana, G.; Ciurana, J.; Bacre, D.; Rodriguez, C.A.   "A Cost Model for Vertical High Speed Machining Centres based on the Machine Characteristics."  Proceedings of the 6th international conference on High Speed Machining  1 (2007):  41-.
        Albertí, M.; Ciurana, J.; Rodríguez, C.A.  "Analysis of cycle time as a function of manufacturing conditions in high speed milling of aluminium alloys."  Proceedings Fifht International conference on High Speed Machining  1 (2006):  455-463.
        Ferrer, I.; Rios, J.; Ciurana, J.  "Integration of Manufacturing Process Knowledge in Part Design Phases."  Advanced Manufacturing and Processing Technology  1 (2006):  25-29.
        Flores, V.; Ortega, C.; Albertí, M.; Rodriguez, C.A.; Ciurana, J.; Elías, A.  "Evaluation and modeling of productivity and dynamic capability performance machining centers."  Proceedings of the 6th international conference on High Performance Cutting   (2006):  -.
        Garcia-Romeu, M.L.; Ciurana, J.; Ferrer, I.  "An experimental study on springback of aluminum and stainless sheet metals in an air bending process."  Advanced Manufacturing and Processing Technology  1 (2006):  150-154.
        Albertí, M.; Ciurana, J.; Rodríguez, C.A.  "A decision support system for machine selection."  Proceedings of International conference of Decision Science Institute  1 (2005):  559-568.
        Ciurana, J.; Garcia-Romeu, M.L.; Ferrer, I.; Casadesús, M.  "Designing an activity model for integrating process planning (CAPP) and planning and production control (PPC) in machining processes."  International Conference on Manufacturing Research (ICMR). Proceedings  1 (2005):  -.
        Ciurana, J.; Garcia-Romeu, M.L.; Rodríguez, C.A; Vazquez, V.  "Integration of information technology for manufacturing education."  IMECE 2005 ASME International Mechanical Engineering Congress  1 (2005):  133-.
        Garcia -Romeu, M.L.; Ciurana, J.; Barret, J.  "Design and implementation of an assistant tool to select the blank for drawing sheet metal parts."  International Conference on Manufacturing Research (ICMR). Proceedings  1 (2005):  -.
        Garcia-Romeu, M.L.; Ciurana, J.; Albertí, M.; Sabater, M.; Planas, D.; Terradas, M.  "Sistema docente interactivo para el autoaprendizaje de elementos, partes y máquinas en procesos de fabricación."  Proceedings MESIC 2005 I Manufacturing Engineering Society International Congress  1 (2005):  75-.
        Perez, R., Ciurana, J., Riba, C.  "Sintesis dimensional de tolerancias en el proceso de diseño."  II conferencia científica Internacional de la Universidad de Holguin  1 (2005):  -.
        Rodríguez, C.A.; Ciurana, J.; Elias, A.  "Industry and University cooperation to enchance manufacturing education."  CIMEC (CIRP) 3rd SME International conference on Manufacturing education  1 (2005):  301-310.
        Ferrer, I.; Ríos, J.; Ciurana, J.; Macià, J.  "Selección de procesos de fabricación y análisis de fabricabilidad en el diseño preliminar."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  1 (2004):  173-180.
        Ferrer, I.; Ríos, J.; Garcia-Romeu, M.L.; Ciurana, J.  "Representación e intercambio de información entre sistemas CAX de diseño y fabricación."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  1 (2004):  413-421.
        De Castro, R.; Tibau, J.; Ciurana, J.  "Changes in operation strategy in pig-production: application on pig fattening phase."  Proceedings of Production and Operations Management Conference  1 (2002):  -.
        Ferrer, I.; De Castro, R.; Casadesus, M.  "Diseño de un modelo para la simulación y análisis de una línea de producción de motores eléctricos."  Metalunivers  12 (2002):  38-38.
        Garcia-Romeu, M.L.; Albertí M.; Ciurana, J.  "Desarrollo de una aplicación informática para el cálculo de tiempos y costes en procesos de arranque de viruta ."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  1 (2002):  278-282.
        Garcia-Romeu, M.L.; Ciurana, J.; Giménez, G.; De Castro, R.  "New sequential model for aided process planing ."  International Federation of Operational Research Societies  1 (2002):  17-.
        Giménez Leal, G.; Casadesus, M.; Ciurana, J.  "Firms and environmental certification: an empirical study of Spanish firms."  Proceedings of Production and Operations Management Conference  1 (2002):  -.
        Garcia-Romeu, M.L.; Ciurana, J.; Casadesús, M.  "Evolución de los sistemas asistidos para la planificación de procesos ."  Congreso de Ingeniería de Proyectos  1 (2001):  -.
        Ciurana, J.; Casadesús, M.; Serras, F.; De Castro, R.  "Design of CAPP (Computer Aided Process Planning) information system for the planning of manufacturing processes. Implementation applied to mechanical components."  Robotics and Factories of the Future  1 (2000):  257-264.
        Ciurana, J.; Riba, C.; Garcia-Romeu, M.L.  "Sistema asistido para la formación de las cadenas de la síntesis de cotas unidireccional."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  3 (2000):  1839-1844.
        De Castro, R.; Ciurana, J.; Gimenez Leal, G.  "Description of an information system for implementing a computer aided process planning (CAPP) system considering technical and management paramenters."  Production and Operation Management  CD-Ref2059 (2000):  -.
        Garcia-Romeu, M.L.; Ciurana, J.  "Descripción de variables tecnológicas implicadas en la planificación de procesos para el desarrollo de un sistema asistido."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  3 (2000):  2165-2170.
        Garcia-Romeu, M.L.; Ciurana, J.,  "Evaluación de un sistema CAD/CAM/CNC a patir de la obtención de geometrías básicas en máquina."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  1 (2000):  439-444.
        Perez, R.; Ciurana, J.; Riba, C.  "Principales enfoques en el estudio de las dimensiones y tolerancias."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  3 (2000):  1833-1838.
        Ripoll, L.; Ciurana, J.; Garcia-Romeu, M.L.  "Aplicación de la acotación funcional para el rediseño provocado por avería del acoplamiento motor-reductor."  Anales de ingeniería mecánica : revista de la Asociación Española de Ingeniería Mecánica  2 (2000):  1011-1016.

         

        Review (Ressenyes i Recensions)
        Serrano-Lasa, I.; De Castro, R.; Goienetxea-Uriarte, A.   "Pacemaker, Bottleneck and Order Decoupling Point in Lean Production Systems."  International Journal of Industrial Engineering-Theory Applications and Pra  16 (2009):  -.
        Serrano-Lasa, I.; De Castro, R.; Ochoa-Laburu C.  "Extent of the Use of Lean concepts proposed for a Value Stream Mapping Application ."  Production Planning & Control  20 (2009):  82-89.

         

         

        Source of the data: System of information GREC